Vr zircon problems

[Jahwah]

I'm having trouble with my aircon.

It only turns on once you turn the power to 3 or 4. And it only comes out at feet ports not anywhere else.

Any ideas would be greatly appreciated!

[hsv91ss]

What happens when u select the top vents only on the a/c control switch?

Sounds like a problem with the blower though.

[GothicKidd]

Having only 2 fan speeds means it would be your Fan Speed Resistor. Around $20 from wreckers... $40 ish from eBay. Easier replacement..
You could have a vacuum leak or the hoses being disconnected at the Heater/Air con unit thing..


Fan Speed resistor:
Replacing the Fan Speed Resistor

[Jahwah]

No matter what it's set to it only blows out at the feet

[GothicKidd]

No matter what it's set to it only blows out at the feet

Could be a vacuum leak; Do you hear any hissing when you start it? or turn it off?

[Paul13pp]

My VS only blew air onto the floor and the knob to change where the air comes out did nothing.
The fix was a vacuum line had come off.
Located drivers side just at the end of the console (behind it) near the heater control rod.(close to the floor end of console near pedals) It was a clear coloured vacuum line that needed plugging back on to where it belonged.
You will need a torch to see it.

[Jahwah]

Do you have any pics of the part it was? I was told this before but couldn't find it

[hako]

Here is the picture - they are the 2 clear plastic elbows on the left of pix.

[Jahwah]

Thanks. Yea there both connected. I still haven't figured it out might need to take it to someone to look. Any more ideas before u take it?