Vs exec install berlina dash

[Jake.VScommo]

Hey guys i hav a vs exec, an i want to put a calais/berlina dash in it, wat do i need to do it? I hav a berlina dash thats out a vp my mate said, im not sure. And he also gave me a level 3 loom. Can i use a vp etc set up or does it hav to be vs loom and dash? Also do i need a trip computer thing to work the electrics in the dash. Any help about this will really help, cheers

[88GreenVN]

If the cluster part number starts with a K then it will not work for you. You will need a R or S first digit part number. The L3 loom you have hill need to be un taped and the plug set cut out of it. You cut the 4th plug and switch block plug where it joins the main loom. Then graft it into the Executive loom using the instructions found in the "tripin" thread.

[Jake.VScommo]

Ok sweet as well i will hav to check the part number on the cluster first the hav a look at the loom, so by the plug set, do u mean the fuse plugs??..

[flawnt]

the 4th connector is the plug that connects to the underside of the cluster (where the LCD's get thier info from)
switch block plug i believe is the plug that connects to the trip computer unit
then you run a wire to the yellow/black wire near the ecu

and thats it! i did mine a few days ago for the first time and got it. thanks to 88GreenVN and makovr. goto the Tripin' thread, it explains everything there..

ave fuel was so high because i just plugged it in and i only took it around a couple of blocks. its at 16.6 L/100K