vt supercharged motor into a N/A vs series3 ute wat do i need for this?????

[Nathsp2]

vt supercharged motor into vs series3 ute wat do i need for this????? can i use the loom off a vs supercharged car on the vt one?? please add anything to this tread that u would think i will need to no.

[Whales]

Im guessing its a 6 pot? As far as I know it should be all good correct me if im wrong....

[SweetWagon]

vt supercharged motor into vs series3 ute wat do i need for this????? can i use the loom off a vs supercharged car on the vt one?? please add anything to this tread that u would think i will need to no.

You can actually use your standard loom and just extend a few wires... you need to drill and tap the LIM for the vs temperature sender, and you need the VS passenger side engine mount bracket.

Cheers

[Nathsp2]

Thanks guys do I need to use a supercharged models ecu or the standard N/A will work and I read alot about the memcal does this need to be changed

[The1]

if your vs already has 16210672 pcm then just change the memcal, vt uses 16233396 for n/a and super6

[Nathsp2]

how do i find out if it already has 16210672 pcm???

[The1]

it's written on it...

[Nathsp2]

hahaha ok that make sense sorry for the stupid question

[Nathsp2]

if your vs already has 16210672 pcm then just change the memcal, vt uses 16233396 for n/a and super6

hi mate i asked this question awhile back im doing the engine change over and my PCM is a 16269018 can i use this still and change the mamcal over. thanks for your help

[The1]

you need to read the service number not the serial number. You can download the memcal id tool in my sig, it has all the service numbers in it for each model