Fuel warning lite

[justbad4you]

SMALL PROB>>>after replacing every last bulb behind dash> i now dont get the fuel warning light to glow?(yes its also a new bulb) i still get the warning tone,just no light.......any ideas......cheers in advance

[justbad4you]

evrey other light works.....just the 1 in the fuel warning light.....and yes i check and its not a faulty bulb.....its got me buggered? i changed all bulbs as my power light had gone....now the blooody fuel lite aint a working.i did em all aircon,all behind dash,,,even anew 1 in the cig lighter.....not 2 worry

[88GreenVN]

SMALL PROB>>>after replacing ever last bulb behind dash> i now dont get the fuel warning light to glow?(yes its also a new bulb) i still get the warning tone,just no light.......any ideas......cheers in advance

If the globe is not working - and the chime is - then it's simply not making good contact or the copper track on the cluster is broken (asuming that nothing ewlse in the wire loom has not been damaged)

[Z2TT]

It seems that the Fuel light is grounded by the "Speed Alert" module, this should be the one on your dash

Try replace the Speed Alert module with another one and see if this helps.

[justbad4you]

If the globe is not working - and the chime is - then it's simply not making good contact or the copper track on the cluster is broken (asuming that nothing ewlse in the wire loom has not been damaged)

88 id be going with what you say.....as when the chim when of today i kinda did the holden dash slap just above the fuel light and it came on....so i say your 100% spot on with the globe not making good contact on the copper track.....the tap on the dash may have fixed it lol if it does it again ill pull out the globe and give it a clean........thanks 88greenvn( pos rep sent yourway)

[VR38]

The holden dash slap lol.

[justbad4you]

The holden dash slap lol.

yeah the old slap...........still working ( no more slapping needed lol) still got to slap when fuel is low

[96calais]

buy a cheap multi-meter from jaycar/dicksmith and test the bulb/bulb holder. use the 12volt dc setting and continuaty setting on the meter. easy!!!