VR Power Steering PUMP removal instructions

[ausleo]

I am searchiong for the instructions, step by step for a neighbour any help, links etc would be appreciated.

The vehicle is a V6, VR Commodore.

TIA

[Jarryd F]

its pretty easy. Ill go off memory.

1-remove the 4x 10mm bolts on the power steering pump pulley
2-remove serpentine belt
3-remove the small power steering line going to the resivior and catch all the fluid so it doesn't spill.
4-remove the 3 8mm bolts holding the reservoir on to the pump.
5-losen the metal hard line thats connected at the back of the pump. you will need to use an open end spanner but one of those crows foot (flare nut) spanners work best. I think its the closest imperial size to either 15mm or 17mm
6- remove the 3 bolts (17 or 19mm) which hold the pump to the motor/tensioner bracket.

install is the reverse of removal

[ausleo]

Thank you for your reply

very much appreciated