Sedan springs into Ute

[Trayner]

Hey guys got to get my ute road worthy and needs its ass raised up in the air
Theres a wrecker in town but hardly have utes there only sedans and wagons.

Its a live axle one so I was wondering if say stock springs out of a vn,vp,vr sedan/wagon will fit in the ute and raise it up?

Any answers would be grateful

[seq4x4]

From my experience. VU Low IRS springs sat at standard height in a VS IRS sedan. Hope this helps.

[VKCOMMO]

From my experience. VU Low IRS springs sat at standard height in a VS IRS sedan. Hope this helps.

Its live axle..

Trayner.. how low is it? Most places ive come across dont check height, its a quick lights and horn check, brake test, tyre tread and front wheel bearings, then $35 later and its all cool..

[Trayner]

Its live axle..

Trayner.. how low is it? Most places ive come across dont check height, its a quick lights and horn check, brake test, tyre tread and front wheel bearings, then $35 later and its all cool..

Not with vics new roadworthy laws $180 for one now too , so I wana pass first shot lol

umm its like 93ish mm from lowest point , normaly they would of passed it at that height , but yeh new laws they cant be dodgy and that


New Victorian Roadworthy Laws

[seq4x4]

Its live axle..

Oh really...? I wouldnt have added "Hope this helps" if i didnt read this post or that it was IRS...

As for the 7mm, remove some weight. Drive around on 2 fifths of #### all fuel. Might just make it legal.

[Trayner]

got some stock springs from a vs wagon and boom the ute is like 130-140 mm of the ground , so I can confirm that they fit

[89vn]

Jack you ute up get a block of wood and sit it between your diff and the body of the ute. I just done that on my vr ss cause it hassssl springs in it.
Passed first go