Vs ute bumpstops

[Trayner]

Been looking everywhere for Vs ute bumpstops as mine currently has 0 in it at all , and im so over the whole metal on metal noise over bumps etc

Ive been to auto barn , repco , supercheap and non know where to order any from ? (they all looked in there little part books and comps )

Does anyone know where to get them or who makes them ?

I was thinking if all else fails ill go get some from holden

[SP00KSTER]

Holden probably has them but im quite sure that pedders and other suspension shops usually have them.

[pjdm1980]

A mate was telling me that if you have a lowered ute you can modify wagon bump stops to fit because they're shorter and bolt up slightly differently, this would give you some travel. He hasn't done yet so couldn't be 100% sure if it's true or not.

[tim005]

A mate was telling me that if you have a lowered ute you can modify wagon bump stops to fit because they're shorter and bolt up slightly differently, this would give you some travel. He hasn't done yet so couldn't be 100% sure if it's true or not.

I heard this the other day too. Wagon bumpstops are a slightly different shape therefore sit lower on the chassis. Apparently you can cut off the ute stop holders and modify and weld wagon ones lower to suit. I have no idea how to go about it but in theory it sounds alright.
But Trayner, I took my stops out and it was horrible metal on metal and it can't be good for the chassis. I've heard pedders have them. My ute has uneven ones in it, ones a stock one an ones a red one, I'm assuming the red one is from pedders where the car was lowered. Maybe check there mate?

[cander24]

If you have none at all, why not try a wrecker???
Cheers

[GRPABT1]

Wrecker for the cheapest option, just look for some in decent nick on a car that isn't lowered. Failing that suspension shops like pedders

[Trayner]

Yeh went down to pedders today guys
Was around $30 each for the rubbers .
And took about 10 mins to put into the ute , might cut the rubbers slightly thou as they are touching the axles 24/7 from it being lowered

[tim005]

I thought they'd have them there. Are they red?
Yeah man, don't want your ute sitting on the stops, cracks chassis'.
Mine are cut down with the old hacksaw to sit level with some clearence, dobesz helped me do it when I put my pedders springs back in after I'd had enough of driving around with choppies haha.

[seq4x4]

I heard that if you raise your car to legal height you wont have a problem..

[Trayner]

I thought they'd have them there. Are they red?
Yeah man, don't want your ute sitting on the stops, cracks chassis'.
Mine are cut down with the old hacksaw to sit level with some clearence, dobesz helped me do it when I put my pedders springs back in after I'd had enough of driving around with choppies haha.

Nah they are black lol, yeh I might whip out the hack saw and take like one of the round lumps off lol .

I heard that if you raise your car to legal height you wont have a problem..

Yeh it is at legal height pretty much man , lowest point is the exhaust at like 98mm because of the hangers sagging
Vs utes are really gay when you have to lower them , can hardly get any lowness with out hitting the axles lol