The tps on my v6 vs stato is playin up. Do I replace it or can I fix the original? Cheers
yeah i have a problem with my vn tps aswell the enging light is on and i did a ecu check and its for the tps so i changed it reset my ecu and the engine light is still on and i did another ecu check and its still coming up fot the tps so its got me beat.... whats the problem with urs
Wants to die as a change from park to reverse then reverse to drive... Nothing serious, just annoying lol
Mine does that at times, but there is nothing wrong with the TPS
Ahh. But in my other post someone said it was?
yeah i dont have that problem but i dont know what mine is
Last edited by vn1989; 18-11-2011 at 09:22 PM.
If you lose or forget to replace the drive adaptor when removing/replacing the TPS it will not work.
"If anyone disagrees with anything I say, I am quite prepared not only to retract it, but also to deny under oath that I ever said it." --T. Lehrer
"The secret of success is sincerity. Once you can fake that you've got it made." -- Jean Giraudoux
If your battery voltage has been low at one point like below 10 volts it will bring up engine light, just because sensors won't be gettin required voltage therefore tells the ecu there is a fault, check wiring and the plugs in the circuit, Even give ya throttle body a spray and check vacuum lines, I've come across heaps of problems similar and some can just be the smallest bullshit things
i have cleaned the throttle body and my battery is almost stuffed i get just over 2 songs with out the car turned on and its flat
The drive adaptor is part of the TPS and can drop off when removing/replacing the TPS....if you haven't removed the TPS it will not be a issue.
"If anyone disagrees with anything I say, I am quite prepared not only to retract it, but also to deny under oath that I ever said it." --T. Lehrer
"The secret of success is sincerity. Once you can fake that you've got it made." -- Jean Giraudoux