Need help!

[slutvs]

Hey fellas haven't been on here for a while but do need some help. I've just bought a momo steering wheel since I found out I have no airbag in my standard one and am having some issues undoing that 22mm bolt that holds the wheel on in the centre. I cannot undo it no matter how hard I try there's also a little clip around the bottom of the nut don't know if it's holding it on or whatever. I'm sure some of you have done this before!

[Not_An_Abba_Fan]

22mm socket, short extension and a long bar. Lock the steering and then just undo it.

[gossie]

Just be careful it doesn't compromise ADRs, otherwise you may have no insurance and a man in blue giving you a nasty surprise.

[slutvs]

Thanks abba never thought o locking the steering wheel haha derr. What are ADRs?

[Not_An_Abba_Fan]

Australian Design Rules.

Net police are big on changing anything from stock. If you listened to some people on a forum nobody will be driving around in modified cars as most modifications are technically illegal.

As long as the steering wheel has ADR approval you will be fine, some don't because their diameter is too small.

[slutvs]

Australian Design Rules.

Net police are big on changing anything from stock. If you listened to some people on a forum nobody will be driving around in modified cars as most modifications are technically illegal.

As long as the steering wheel has ADR approval you will be fine, some don't because their diameter is too small.

Ahk thanks for that. Do they just give out defects for it?

[James39]

Ahk thanks for that. Do they just give out defects for it?

Yes and a nice fine...