High guy's
my daughter has a VS 97 series III commodore ute
5 speed manual 3.8ltr and the thing revs it's tit's off between gear changes? so when changing gears it's doesn't return to idle unles you wait for revs to drop then change?
any ideas guy's? i suspect TPS (throttle position sensor)
I have cleaned IAC motor and throttle body.
Last edited by 2greedy; 06-01-2012 at 02:50 PM.
Wouldn't be the 'power/econ' button on would it? With PWR on mine used to rev heaps before a gear change, but fine with it on econ.
forgot to mention m8 it's a 5 speed manual no pwr/eco button
no it idles normal in neutral and even if you rev it in neutral it seems to return to idle pretty quick, it's only when your driving and change gears it's reving like a mongrel! sounds like ya don't know how to drive and slipping the clutch?
Similar thing happened to a mate and it was the speed sensor on the gearbox. Checked for error codes? Im betting it's that....
MY WEAPON: http://forums.justcommodores.com.au/...ng-10-psi.html
NEED 3.9 or 3.7 DIFF GEARS, PM ME IF YOU KNOW OF ANY
Things I can think of are, sticky throttle or cable, The TPS is stuffed or you have a vacuum leak...
Check error codes go from there.
Welcome to the internet where people have opinions that you might not like