gas processors

[shonky12]

hi

will the impco cdp-oz or commander fuel processor work with the impco l converter and 225 mixer

thanks

[Not_An_Abba_Fan]

Can't see how it will work as there is no fuel control with a mixer system, it's like a carby, put your foot down and in goes the fuel. Closed loop feedback from an O2 sensor won't make any difference to fuel delivery except with injection.

[shonky12]

will the impco cdp-ox or commander ecu work with the impco l converter/225 mixer as theres impco cdp-oz or commander ecus on vr/vs v6 with the impco l converter and 225 mixer

what works with the impco l converters and 225 mixers

[Not_An_Abba_Fan]

Why don't you ask the people that sell them?

[strgas]

the processor will work in conjunction with the 225 mixer and convertor when hooked up correctly , i dont have the diagram handy but once back at work should be able to find it for you and will post it up

[shonky12]

can anyone that knows about auto electrics put a ecu in a existing gas system that starts a car on petrol then automatically switches to gas.

will a ds101 dual start fuel control work on a impco lpg

someone with a gas license said you only need a license to work on the liquid side

[strgas]

licenses are required to work on the high pressure side of the system correct , any other work can be performed by mechanics auto elec's , yet to here of anyone being busted for doing the work on the high pressure side without a license .

[shonky12]

so anyone even mechs can replace a gas ecu and wiring

[strgas]

correct but would you ask a plumber to fix your electric lights at home ? better to have someone that knows how to fit it and set it up correctly

[shonky12]

will it matter if anyone that knows about wiring harnesses and ecus works on the lpg electrical wiring and clear gauge

[strgas]

only matters if they stuff it up and short out wiring and ecu's induce voltage where its not meant to be , use of scotch locks instead of soldering connections bad earths and dodgy connections , seen lots of poorly converted cars over the years in the trade .

[shonky12]

hi

does anyone have a wiring diagram for the fcp-1 impco processor and will a impco cdp-oz work on a 225 mixer and e or l converter if a fcp-1 impco processor was there before

where would you get a 2nd hand ds101 dual start fuel control and impco cdp-oz processor to