Results 1 to 14 of 14

Thread: Vr Manual making ticking noise.

  1. #1
    Excale's Avatar
    Excale is offline Aussie N Proud!
    Ride
    VL Berlina 5sp Manual[SOLD], VN V6[SOLD],VR S 5sp

    Join Date
    Mar 2009
    Location
    Melbourne, Aus
    Posts
    118

    Default Vr Manual making ticking noise.

    Hey everyone,
    I havn't had the best luck with my cars...my last VS commodore was a dud and developed a knocking noise which was big end. (NEVER GOING BACK TO ECOSHIT!)Now my buick VR commodore 5sp manual is making a ticking noise when driving and on idle, it started when my mate decided to give the car a flogging over 100k's flat to the floor and then all we heard was a BEEP noise and he backed off, (not sure if it was someone on the road or the car that made the beep noise), ever since then it's made the noise. to make things worse, I just got the RWC and booked my inspection in to be registered , recently installed geni extractors, high flow cat and redback exhaust. Have tightened all the extractor bolts, exhaust bolts, cat bolts and made sure my spark plugs where tight. I've only just done a FULL service on the car including leads, oil etc etc about 1000k's ago. I went to Supercheap this morning and put some tappet noise stop in the oil just incase it was the tappets.


    Here is a video of the engine making the noise on idle, it makes a ticking noise when your driving too...

    VR S making ticking noise - YouTube

  2. #2
    Ride
    D22 St-r Navara

    Join Date
    Dec 2010
    Location
    perth
    Posts
    537

  3. #3
    edals's Avatar
    edals is offline Blues Brother # 1
    Ride
    VY 2002 Wagon, VX 2001 Sedan

    Join Date
    Sep 2008
    Location
    QLD/NSW Boardish
    Posts
    1,089

    Default

    A Idea Mate, Pull off the belt, start her for a moment and see if it still makes the sound. Sounds like a pully of sorts to me. Im Thinking the Harmonic Balancer, My Father inlaws made a similar sound.

  4. #4
    Excale's Avatar
    Excale is offline Aussie N Proud!
    Ride
    VL Berlina 5sp Manual[SOLD], VN V6[SOLD],VR S 5sp

    Join Date
    Mar 2009
    Location
    Melbourne, Aus
    Posts
    118

    Default

    Quote Originally Posted by Krisp View Post
    Your mate is an idiot, but your a bigger one for letting him do that
    As the passenger in the car i did not have any control of the accelerator pedal...

  5. #5
    Excale's Avatar
    Excale is offline Aussie N Proud!
    Ride
    VL Berlina 5sp Manual[SOLD], VN V6[SOLD],VR S 5sp

    Join Date
    Mar 2009
    Location
    Melbourne, Aus
    Posts
    118

    Default

    Quote Originally Posted by edals View Post
    A Idea Mate, Pull off the belt, start her for a moment and see if it still makes the sound. Sounds like a pully of sorts to me. Im Thinking the Harmonic Balancer, My Father inlaws made a similar sound.
    I was thinking maybe harmonic balancer aswell, but unsure, i hope it's not serious, anyone else got any idea's?

  6. #6
    edals's Avatar
    edals is offline Blues Brother # 1
    Ride
    VY 2002 Wagon, VX 2001 Sedan

    Join Date
    Sep 2008
    Location
    QLD/NSW Boardish
    Posts
    1,089

  7. #7
    James39's Avatar
    James39 is offline Gave up on VL's
    Ride
    1995 VS Acclaim & 1992 Holden Barina

    Join Date
    Jul 2009
    Location
    Newcastle NSW
    Posts
    876

    Default

    exhaust leak or tappet noise


    ECOTEC is not shit. Treat em like shit and they will become shit............
    I have seen many big ends blow on the old buick as well.

  8. #8
    Excale's Avatar
    Excale is offline Aussie N Proud!
    Ride
    VL Berlina 5sp Manual[SOLD], VN V6[SOLD],VR S 5sp

    Join Date
    Mar 2009
    Location
    Melbourne, Aus
    Posts
    118

    Default

    Quote Originally Posted by James39 View Post
    exhaust leak or tappet noise


    ECOTEC is not shit. Treat em like shit and they will become shit............
    I have seen many big ends blow on the old buick as well.
    Well every ecotec i've had was always either a slug or a shitter!

  9. #9
    Excale's Avatar
    Excale is offline Aussie N Proud!
    Ride
    VL Berlina 5sp Manual[SOLD], VN V6[SOLD],VR S 5sp

    Join Date
    Mar 2009
    Location
    Melbourne, Aus
    Posts
    118

    Default

    Quote Originally Posted by edals View Post
    Well pull the belt off, if it still does it we can rule out other pullies etc.
    How do i pull the belt off?

  10. #10
    edals's Avatar
    edals is offline Blues Brother # 1
    Ride
    VY 2002 Wagon, VX 2001 Sedan

    Join Date
    Sep 2008
    Location
    QLD/NSW Boardish
    Posts
    1,089

    Default

    VR/VS Engine Belt

    But Please be sure you know how to put the belt back on. IE have a photo of the way the belt routs around all the pullies. only have it running for a few seconds so you dont run your battery flat or over heat the car.

    If your still not sure take it to a mechanic please.

  11. #11
    James39's Avatar
    James39 is offline Gave up on VL's
    Ride
    1995 VS Acclaim & 1992 Holden Barina

    Join Date
    Jul 2009
    Location
    Newcastle NSW
    Posts
    876

    Default

    Quote Originally Posted by Excale View Post
    Well every ecotec i've had was always either a slug or a shitter!
    They must of been thrashed or poorly maintianed.

    At the end of the day you treat any car like shit and it will fail. Take your car for example, it was treated like shit now you have a problem.
    Last edited by James39; 08-01-2012 at 10:10 PM.

  12. #12
    Excale's Avatar
    Excale is offline Aussie N Proud!
    Ride
    VL Berlina 5sp Manual[SOLD], VN V6[SOLD],VR S 5sp

    Join Date
    Mar 2009
    Location
    Melbourne, Aus
    Posts
    118

    Default

    Quote Originally Posted by James39 View Post
    They must of been thrashed or poorly maintianed.

    At the end of the day you treat any car like shit and it will fail. Take your car for example, it is was treated like shit now you have a problem.
    Yep, big wake up call, hopefully taking the car to a mechanic tomorrow, I have a feeling it might be my extractor gasket but who knows.....

  13. #13
    Ride
    VK SL 5spd

    Join Date
    Sep 2009
    Location
    Wagga Wagga
    Posts
    1,114

    Default

    Injectors are always noisy on the early V6's. Certain revs they are noisy, around 2100 2500 range they tend to get a little ticky if you listen.

  14. #14
    Excale's Avatar
    Excale is offline Aussie N Proud!
    Ride
    VL Berlina 5sp Manual[SOLD], VN V6[SOLD],VR S 5sp

    Join Date
    Mar 2009
    Location
    Melbourne, Aus
    Posts
    118

    Default

    Took the car to the mechanics today, the guy said the ticking noise was injector rattle and the ticking noise as you drive sounds like an exhaust leak, i've tightened the exhaust bolts and cat bolts so, it's gotta be the extractor gasket. Thanks for everyones help!


Similar Threads

  1. vn v6 manual making winding noise
    By shnap2nd in forum VN - VP Holden Commodore (1988 - 1993)
    Replies: 4
    Last Post: 05-07-2010, 08:58 PM
  2. VY S2 V6 making ticking noise
    By benhaines in forum VY Holden Commodore (2002 - 2004)
    Replies: 9
    Last Post: 04-08-2009, 10:27 PM
  3. YT 1.9/1.95 rockers making a ticking noise
    By CHARGEDVT in forum Yella Terra
    Replies: 3
    Last Post: 30-01-2009, 02:09 AM
  4. Can anyone help? Ticking making me go crazy!
    By Emackulation in forum VN - VP Holden Commodore (1988 - 1993)
    Replies: 43
    Last Post: 17-10-2006, 10:01 PM
  5. motor making ticking sound
    By TINYTIM in forum VT - VX Holden Commodore (1997 - 2002)
    Replies: 16
    Last Post: 12-06-2006, 09:47 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72