Hey guys, im stuck at the moment. Went to go do my fuel reg this morning and hit a wall. I dont want to break anything so i thought i might ask as i need my car for work tonight.
The problem i can see is the hose "appears" to be stuck to the fuel pressure reg. Any ideas on how to remove it? Picture attached. There appears to be a plastic line inside of the rubber one that is pretty well attached to the barb.
Cheers.
![]()
VR and VS error codes:
VS V8 DTC/Error codes comprehensive list.
VS V6 DTC/Error codes comprehensive list.
Just went to Holden to get a price on them changing the reg on the hose, they reckon they cant do it.. Im lost.
VR and VS error codes:
VS V8 DTC/Error codes comprehensive list.
VS V6 DTC/Error codes comprehensive list.
Just put it in a vice and give it a pull mate. If the hose breaks it should still be long enough.
If not just take her down to your local radiator joint, they should have some hose in stock.
Cheers,
Jake.
Just cut the hose off with a razor blade.. cut it parallel with the barb and just fold it off
Thanks for the tip guys, i got it off using some heat treatment. Will write up a how to on how i did it.
VR and VS error codes:
VS V8 DTC/Error codes comprehensive list.
VS V6 DTC/Error codes comprehensive list.
How much was the regulator and where did u get it from?
95 VS Berlina
http://forums.justcommodores.com.au/...ml#post1891856
I need some statesman/ calais woodgrain for drivers side panel!!
Check in the how to. Changing VS fuel reg.
VR and VS error codes:
VS V8 DTC/Error codes comprehensive list.
VS V6 DTC/Error codes comprehensive list.
"If not just take her down to your local radiator joint, they should have some hose in stock".
Shouldn't it be fuel hoes not radiator hose?
My local radiator joint stocks hoses for all applications.
If a country radiator shop does that I see no reason why anyone else shouldn't.
Cheers,
Jake