diagnostics test

[vincent49]

I have just started to do that diagnostic test with pins 5 and 6 covered (VR 94) under the wheel.
My question is: Does the flashes do 1 series of flashes after the other?
My first one was 3 flashes followed another 3 flashes. Then another series of flashes would start shortly after, which was 3 flashes followed by 4 flashes.
Will the diagnostic test keep spitting out error after error in flash sequences; or do u fix one and repeat the test for the next error.
Hope that pile of **** makes sense!

 

[fitzy2005]

it always displays code 12 first, 1 flash -- 2 flash, 1 flash -- 2 flash, 1 flash -- 2 flash, then any other code here

 

[vincent49]

do u mean it will flash code 12, 3 times then flash the first error code emmidiately after?

 

[MarzVP]

it flashes each number three times

 

[fitzy2005]

each code is display 3 times followd by the next

eg. the first error code is 12 not matter wot soo

1 flash , 2 flash
1 flash , 2 flash
1 flash , 2 flash
3 flashes , 2 flashes
3 flashes , 2 flashes
3 flashes , 2 flashes

etc

giving you error codes 12,12,12,32,32,32

 

[vincent49]

I understand thanks!
but will "ALL" the error codes come up in one sequence of flashes or do u have to fix one error code first before you can get a new error code?

 

[fitzy2005]

hehe no worries, um not quiet sure coz ive only ever had one problem at a time.. somebody else should be able to answer that question

 

[Raging Bull]

Yes all the codes come up, one after the other. Each flashes 3 times as outlined already.

 

[vincent49]

ok thats good i think cos i got a code 12 followed by code 13 then a code 12 again all three times. Does this mean only a oxygen sensor is needed?
Also does the flashes end in a code 12 apon completion? It actually went:
code 12
code 13
code 12
code 13
etc..

 

[fitzy2005]

yep, oxy sensor, mine did this once before i unconnected it then reconnected it (the wiring) and i never got the code again, worth a try