T5 from Vn in Vr

[B.C]

Hey,

Just wanted to know if it is possible to change an auto vr to manual using a T5 and clutch from a Vn also would the diff from a vn fit into a vr aswell. If any of this is possible would it be hard or cost much???

Cheers

 

[HDT_aero]

both the box and diff will bolt straight up but you will have to source a vp or vn s2 flywheel for it

 

[B.C]

sweet as thanx for that, i have a vn s2 that im taking the box and diff out of so it should all be sweet then. DO u have any idea roughly how much it would cost to do??

Thanx for the help

 

[HDT_aero]

to pay som1 to do it or to buy the parts

it cost about $1600 to get som1 to install but it is a job you could do yourself without to many hassles

make sure you get the
flywheel
starter motor
pedal box with brake and clutch (the auto pedal box is different
console
tailshaft is a different length
the diff is the same so you dont needa swap it

 

[B.C]

ok cool nah im changing the diff cause the one in the vn is lsd thanx for all ur help

 

[383 hatch]

The diff will bolt straight in, but the vn diff is 10mm shorter per side (20mm overall) than the vr/vs diff! So your wheels may rub on the inside of the wheel arch if using bigger than standard wheels, if using standard wheels you should be ok.