Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

DFI module Resistance (OHM)

fitzy2005

New Member
Joined
Jul 27, 2005
Messages
1,971
Reaction score
12
Points
0
Location
Wide Bay, Queensland
Members Ride
VY S2 Berlina
vr v6 auto, slight misfire, hard to start sometimes.

now, im not really familar with all this OHM and resistance stuff, but i was told to take each coil off and test the two pins things for each coil on the dfi module by useing a ohm meter.

i did this and this is what has came up.

now the last one to me looks way out of whack does this mean the modual needs replacing? and to test each of the coils i tested resitance of were the leads go onto (is this correct)
 

Attachments

  • untitled.JPG
    untitled.JPG
    12.9 KB · Views: 900

futronix

New Member
Joined
Sep 29, 2005
Messages
202
Reaction score
2
Points
0
Age
44
Location
Melbourne
Members Ride
2012 VE SV6 MY12.5
manual reads.....

take each coil off.....

test the "primary" termainals located on the underside of each coil

should read between 0.3 - 1.5 ohms

test the "secondary" terminals located on top of the coils (where the leads plug into)

should read between 5000 - 10000 ohms


doesn't state anything about testing DFI....

Hope this helps......
 
Top