I have a VS Spack and am hoping to install ss foglights
Called up a few wreckers who have ss vs's that have been written off but havent been able to find any second hand sets.
Anyone set up foglights and am able to tell me wheres the best place to get the parts from and how much its going to cost me to set em up
cheers guys
search:
1. To make a thorough examination of; look over carefully in order to find something; explore.
2. To make a careful examination or investigation
3. To come to know; learn.
Does the s-pack front bar have the correct openings for SS foglights? I thought only the SS and Calais had the front bars capable of it... but i could quite easily be wrong![]()
Driving a CURSED WH V6.
Holden still stock them I am told...
Approximately $130 each... I need to replace one on my Calais as the mount has broken and the mount can't be bought separate![]()
Disclaimer For The Reader ::
The information I provide is freely given to ONLY help you with thinking on problem solutions. IT IS NOT a "How To Do It Guide".
If you read ANY of my supplied information and use ANY of it you must accept and agree to do so AT YOUR OWN RISK or do not use the information at all.
I accept NO liability if you damage your or anyone elses property or cause any harm to yourself or others with the information provided.
I am NOT a Mechanic. You have been warned.
two torches from big dub 10 bucks. minter just find ones thatll fit in the holes and WAAALA instant spottys.
@ Mattman
Yes they should fit your bumper... I think the VR SS had them without the fancy bezels. But whether your RIO has the bolt holes for the mounts is another story.
Disclaimer For The Reader ::
The information I provide is freely given to ONLY help you with thinking on problem solutions. IT IS NOT a "How To Do It Guide".
If you read ANY of my supplied information and use ANY of it you must accept and agree to do so AT YOUR OWN RISK or do not use the information at all.
I accept NO liability if you damage your or anyone elses property or cause any harm to yourself or others with the information provided.
I am NOT a Mechanic. You have been warned.
Your standard rio bar doesnt have the holes but you can easily drill 2 holes in each side of it ...I can give you the dimensions.Standard front facia bar has to be cut out like http://forums.justcommodores.com.au/...2&d=1126992292this to fit bezels $20 each heres what it looks like from the back http://forums.justcommodores.com.au/...8&d=1126731378and the wiring has to be installed if your car doesnt have the plugs there in your car and run wires from dash plug to fog light switch under your light switch heres the circuit http://forums.justcommodores.com.au/...0&d=1126736115 http://forums.justcommodores.com.au/...1&d=1126991624
Last edited by markovr; 08-03-2006 at 08:42 AM.
This is my vr that I rebuilt ....CLICK HERE to see my vr on Cardomain
......if you want to check it out......Anyway make sure you rubbish a ford daily ....I am a 4DH8RZ Club lifetime member .................new members joining everyday
Well that's one to save for down the road, it's something i'd like to do eventually but won't happen for a while yet.
Next on the list is FE2, extractors, front speakers and maybe amp, the list goes on lol.
Driving a CURSED WH V6.
Good luck finding second hand at the wreckers... I found a set but he wouldn't separate the bar from the foggies...he wanted $450 all up...fark that !!!
I can get a new genuine bar for $ 280 and new foggies for $270... = $550
think I'd prefer new for the extra $100...least I wont be sanding paint.
Disclaimer For The Reader ::
The information I provide is freely given to ONLY help you with thinking on problem solutions. IT IS NOT a "How To Do It Guide".
If you read ANY of my supplied information and use ANY of it you must accept and agree to do so AT YOUR OWN RISK or do not use the information at all.
I accept NO liability if you damage your or anyone elses property or cause any harm to yourself or others with the information provided.
I am NOT a Mechanic. You have been warned.