Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
Block Drain Plug - Ecotec
- Thread starter conf
- Start date
MayhemOfHell
Banned
- Joined
- Apr 6, 2009
- Messages
- 79
- Reaction score
- 0
- Points
- 0
- Location
- Adelaide, South Australia
- Members Ride
- 2004 WL Caprice V8 LS1
I'm not to sure about the VL.... if thats what your referring to even tho this is the VR-VS forum...
I was just working on my VP today as having been dealing with an overheating issue...
On my engine, Series 2 V6, One is just above the starter motor on a "Square" block coming of the engine block.. With a flashlight you can see it from undernear the car... Barely.. The otherside is in a mirrored position as well.
With the V6 one, There is a little red thread/ring/marking around the first thread or two of the bolt.. So if clean you can locate it by that.
Look for two plugs that are the same of both sides of the engine and dont actually bolt anything onto the engine itself. Otherwise the manual should have some useless diagram of it but not where.
I was just working on my VP today as having been dealing with an overheating issue...
On my engine, Series 2 V6, One is just above the starter motor on a "Square" block coming of the engine block.. With a flashlight you can see it from undernear the car... Barely.. The otherside is in a mirrored position as well.
With the V6 one, There is a little red thread/ring/marking around the first thread or two of the bolt.. So if clean you can locate it by that.
Look for two plugs that are the same of both sides of the engine and dont actually bolt anything onto the engine itself. Otherwise the manual should have some useless diagram of it but not where.
wamboin23
Donating Member w/ Boost
- Joined
- Apr 16, 2009
- Messages
- 1,203
- Reaction score
- 34
- Points
- 48
- Age
- 34
- Location
- Wamboin, NSW
- Members Ride
- VS Calais - Cooled L67 + T56 | VF SSV Ute
the knock sensors are the drain plugs in an ecotec.
