S/C VS Headers HELP!!

[VS CALAIS]

Hi,
Gotta bit of problems locating extractors for my VS S/C V6 Calais....
Everyone has made them for VT onwards but never developed any for the VS due to the limited numbers built (as i was informed)
..if anyone is running extractors on their L67 VS PLEASE let me know what brand and who can supply/fit..
Thanx

 

[mattman]

Hummm bugga.

I was quoted $510 fitted from one place here in Adelaide not long ago.. larger diameter than the normal v6 ones. Never asked what brand they were though sorry

But yes you are right... they are a rare breed

 

[sixshooter]

I think they should be the same as normal EcoTec... The only difference between the heads AFAIK was that the injectors were on the S/C head while the N/A had the injectors in the manifold.

Hope that helps...:wave:

 

[AirStrike]

I think they should be the same as normal EcoTec... The only difference between the heads AFAIK was that the injectors were on the S/C head while the N/A had the injectors in the manifold.

Hope that helps...:wave:

Correct. As far as extractors for the VS L67 range go, you have to use the L36 ones. No one makes anything special to suit.
AirStrike :air:

 

[4.2LV6ECOTEC-UTE]

HM headers will fit series 2 ecotec motor sweet as. A bit pricy

 

[VN_Luke]

my mate's running the VS ecotec ones - except pacemaker did a model with bigger primaries find the ones with bigger primaries and you're laughing.

 

[VS CALAIS]

Thanx 4 the feed back ppls...
I also found out that Di Fillipo has a set for the L67 VS , would thier be a differance say between the pacemaker and Di fillipo sets pwoer wise or will it be minimal...?

 

[mattman]

Check the diameter of the pipes.. the bigger the better for the L67.

DiFillipo are supposed to be of good build quality.

 

[TheForgotten]

pacemaker did a model with bigger primaries find the ones with bigger primaries and you're laughing.

not for the ecotech, that's for the buick, unless you're referring to the limited run of paceys snapped up by FIT and sold on to (other forum) members

Correct. As far as extractors for the VS L67 range go, you have to use the L36 ones. No one makes anything special to suit.
AirStrike :air:

what about HM headers? they're designed and sold for the L67

 

[mattman]

not for the ecotech, that's for the buick, unless you're referring to the limited run of paceys snapped up by FIT and sold on to (other forum) members

And they didn't fit the VS anyway...