Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Whiteline Link Pin Kit

Joined
Jul 25, 2004
Messages
582
Reaction score
7
Points
18
Location
Adelaide
Website
www.cardomain.com
Members Ride
VE SportWagon International A4
I install a new Link Pin Kit the other day and it was definitely worth the $60 ( had a knock noise when turning full lock ). It turns into corners much better ( less under-steer ) and is easier to correct if you get it wrong. I'm find myself over-steering due to the stock bushes being so worn out and need to adjust to the new whiteline bushes. My question is, have I compress the bushes enough ? I had them compress a little with the convest/concaved washer pushing into the bush itself. But when I dropped it back on its wheels it took pressure off the bottom bushes. Do I need to adjusted them ?

Don't have pics of the the bushes at ride height yet.
 

Attachments

  • Stock Link Pin Kit.jpg
    Stock Link Pin Kit.jpg
    59.5 KB · Views: 1,525
  • Stock Link Pin Kit 1.jpg
    Stock Link Pin Kit 1.jpg
    61.5 KB · Views: 397
  • Whiteline Link Pin Kit.jpg
    Whiteline Link Pin Kit.jpg
    37.4 KB · Views: 490
  • Whiteline Link Pin Kit Installed.jpg
    Whiteline Link Pin Kit Installed.jpg
    62.6 KB · Views: 459
  • Whiteline Link Pin Kit Installed 1.jpg
    Whiteline Link Pin Kit Installed 1.jpg
    45.4 KB · Views: 529
  • Whiteline Link Pin Kit Installed 2.jpg
    Whiteline Link Pin Kit Installed 2.jpg
    69.5 KB · Views: 596

Slow VR

Another White Crummodore
Joined
Apr 14, 2006
Messages
357
Reaction score
3
Points
0
Location
Cairns, Nth Qld
Members Ride
VR Series II
This is the rough ass job Fulcrum did to mine. It gets rid of the link pins altogether. Im not a huge fan of it.

 
Joined
Jul 25, 2004
Messages
582
Reaction score
7
Points
18
Location
Adelaide
Website
www.cardomain.com
Members Ride
VE SportWagon International A4
That does look tacky :my: Fulcrum is a suspension specialist is Qld right.:whistling

That said, I looks like it has the same function. Just in the opposite direction. Those bushes look like they are compress about the same as mine are.:thumbsup:
 
Last edited:

Slow VR

Another White Crummodore
Joined
Apr 14, 2006
Messages
357
Reaction score
3
Points
0
Location
Cairns, Nth Qld
Members Ride
VR Series II
Yeah Fulcrap is meant to be suspension specialists..... I cant remember how much money ive wasted there chasing a knock in the right hand front corner. I just turn the stereo up now and try to hear it....
 
Joined
Jul 25, 2004
Messages
582
Reaction score
7
Points
18
Location
Adelaide
Website
www.cardomain.com
Members Ride
VE SportWagon International A4
Something wasn't right with either the lock nut or my installation. The lock nut came off and it all fell apart. Just turned the wheel while reversing out and went to take off and heard a loud pop. Though I just ran over something and drove off. Then there a noisy creaking sound every time the right front went over a bump. When I got I went to bed as it was late. Next day the check the front wheel and the bottom two bushes and the lock nut where gone. Luckily I went back to the incident and found the bushes and the washers lying on the road. Only had to replace the lock nut in the end.

Why did this happen ? :confused:
 
Last edited:
Joined
Jul 25, 2004
Messages
582
Reaction score
7
Points
18
Location
Adelaide
Website
www.cardomain.com
Members Ride
VE SportWagon International A4
:embarrass I did not tighten the lock nut enough to break the thread so its able to lock. Should have looked like the second pic not the first one. .:embarrass Oh and thanks to everyone for there help on this thread.:clapping:
 

Attachments

  • Whiteline Link Pin Kit Installed 1.jpg
    Whiteline Link Pin Kit Installed 1.jpg
    45.4 KB · Views: 401
  • Lock nut.jpg
    Lock nut.jpg
    47.7 KB · Views: 494
Top