Whats the best way to remove dirt and junk from my coolant bottle, ive tried to rince it out with water but its not coming out![]()
i used degreaser and a brush. buy spray degreaser for like $5 and it comes right off
sweet thnx manil give it a go
Good idea to just use some degreaser or soapy water and a pressure washer to remove the gunk thats in there. Much easier if you remove the entire coolant tank from the car, its easy enough to do as its only two screws.
Just remember though, if your coolant tank is looking like that, then chances are parts of your cooling system will be too, so if you haven't done so already, it might be an idea to give the entire system a really good flush out, and then refill with the correct grade quality coolant.
i removed the tank from my cars. Good pressure spray has always worked. safe too.
yeah i just bought the car so im tidying it up atm, most of the k's are from country driving so the crap is like brown soil :S
how do i remove the front bar?
i soaked it in methol spirit and domestos over night and that didnt work so hopefully degreaser will do the job
Agreeded with all methods mentioned, though if you dont have a high pressure gun try half filling with soapy water then put some small stones in about 5-6 and hold your hand over the filler hole and shake the s**t out of it.
On coolant grade, most coolant you buy is 1997 grade stuff mixed with soft water (deminralised/distilled) that has stuff that will lube your water pump seals etc.. so no more 3 lube pellets from holden, lol
P.S rain water from a clean R/water tank works well to as it contains no ground minerals.
Last edited by undar8ed1; 09-11-2008 at 11:13 PM.
throwing this out there... something slightly acidic .... bicarb soda
SIR LS1
the two ton go kart
Howdy, just did mine whuch was pretty clean anyway but I removed the tank, rinsed out with warm water then 1/2 filled with hot water and added 1 finnish power ball dishwasher tablet, shook around till it desolved topped up with hot water, had a coffee then rinsed it out, came up like a new one. Tablets are slightly or rather very alkaline.
i just bought some CLR clear in a spray bottle to clean up an old claw foot bath and it did wonders so gonna give it a go i the coolant ressie when i get around to it.
thnx for repplies guys il give those methods a go if they dont work out il just buy a new one![]()
dude - degreaser. Old mate at the top was on the money, thats how I did mine. If you have trouble, flood the c.u.n.t with degreaser, chuck some gravel in, put the cap back on and shake it like an english baby-sitter with an un-wanted red-headed love-child. Tally-Ho!
yep, degreaser or the finish power ball will work great. The metho didn't work cos that brown crud is non-polar, so needs a non-polar solvent like hydrocarbon, or a strong detergent like the powerball to dissolve it. Whoever came up with the powerball idea THATS GOLD.
I used to use sand instead of gravel in there. Worked very well.
how do i remove the front bar to get to the radiator
Here you go..
http://forums.justcommodores.com.au/...amp-bumper.jpg
and some colour pics in this thread complements of RIDAH
Front bumper removal
sweet thnx man![]()
could also chuck in pea gravel and shake the bottle up, thta usually works
swivel sweeper bahahaha.
Petrol?