code 63 help 1995 v6 vs

[carpetsnake]

i keep getting code 63
both oxy sensors r new
code 63 lh oxygen sensor(o2)-no signal
any thoughts about it

[rcnugget]

I got this when my plug to the sensor was unplugged after gearbox was swapped out :P

stupid me forgot to plug it back in,

if it is plugged in then I would take it back to where you got it from demanding a replacement

[hako]

You probably need to clear those codes - disconnect the battery for 10 seconds minimum to wipe the codes memory then check the codes again - they should be gone.

[carpetsnake]

I got this when my plug to the sensor was unplugged after gearbox was swapped out :P

stupid me forgot to plug it back in,

if it is plugged in then I would take it back to where you got it from demanding a replacement

it is plugged in will remove and take back and get replacement

[hako]

If you don't clear the codes you will still get a code 63 as this code is locked in the ECU fault log till cleared according to my Gregorys.

[carpetsnake]

now the next question what side is the lefthand side
standing facing the cars engine is left the drivers side ?or if u sit in the car the passanger side is left
whitch 1 is it ?

[hako]

Left hand side is the passenger side. Did you try clearing the codes?

[carpetsnake]

put another sensor in cleared codes still code 63 and now cam sensor code is coming up
could it be the ecu(computer thingie)?
about 2 blow up car lol
cam sensor is new to so whats the problem

[carpetsnake]

was the ecu so ****ed off at least all the sensors r new as well
put a chip in it at the same time

[VS_Pete_1]

Bloody cars

[Tasmaniak]

remove chip...sounds like you have a sinceya fault....