Air Bag warning light after dash removal..

[Aus78Formula]

Yeah i know theres heaps of these posts about the airbag warning light staying on but nothing that was similar to my situation. Either way I'll call into Holden or electrician in the morning to get reset hopefully.

Anyway, I had my gauge cluster out to change a few faulty globes and now the air bag light stays on, or rather it goes off for half a second then comes back on. I removed again to check for shorted contacts and globe but all seems correct but light still on. Any ideas with this one, does it normally require resetting after the dash has been apart? I haven't had the wheel or anything related to it apart.

cheers,
Ben

[R0d]

Yeah i know theres heaps of these posts about the airbag warning light staying on but nothing that was similar to my situation. Either way I'll call into Holden or electrician in the morning to get reset hopefully.

Anyway, I had my gauge cluster out to change a few faulty globes and now the air bag light stays on, or rather it goes off for half a second then comes back on. I removed again to check for shorted contacts and globe but all seems correct but light still on. Any ideas with this one, does it normally require resetting after the dash has been apart? I haven't had the wheel or anything related to it apart.

cheers,
Ben

i had mine apart but i took my battery off first and the airbag hasnt come on. Anything to do with with eletrical things on the car i take the battery off just incase

[hako]

If the ignition is turned on a fault will be set....this happens when people turn ingition on to listen to the radio whilst the dash is removed. Can only be reset by an elec or Holden.

[Philthy]

Cost me $50ish to be reset from holden

[Aus78Formula]

If the ignition is turned on a fault will be set....this happens when people turn ingition on to listen to the radio whilst the dash is removed. Can only be reset by an elec or Holden.

Um yeah that was me not so much the radio but different switches and lights to test as I went along checking for loose connections....oops

[VS_Pete_1]

Live and learn mate
I have learn the hard way all my life