Hey everyone,
Just want to know which fog lights i can put on my VS acclaim, SS or the statemans ones. I got the relay just need to know how to install the fog lights and which ones will fit.
Cheers
the SS foggies are the ones that will bolt straight up, and its easy enough to get an SS front bar, or get the inserts and add them to ur existing bumper.
the statesman front end is a fair bit different to the standard vs's, also the foggies are longer
I fitted my original foggies by just adding the SS bezels to my std bumper and then lining up the foggies with the holes for the 2 holes in the bottom of the reinforcement behind the bumper.
HSV VZ LS2 Senator, Stealth2 cam 307rwkw.http://forums.justcommodores.com.au/...ados-blue.html
VS11 Berlina L67 super6 wagon 196rwkw. http://forums.justcommodores.com.au/...ified-cai.html
So basically if i get the inserts will they just go straight on? And then if so how do i bolt the lights onto the bar?
if you get the inserts you will have to cut holes into your bumper or you can pay someone to do it for you, its not that hard i did it on my car if you want some pics. as for the lights you can get original ones which are pretty expensive or but some cheapies as i did which work fine but you will have to make some brackets to make it fit. also with the inserts you will have to get them painted to match your bumper
How much of the bar do you need to cut and where about d you need to cut? Anyone got any pics or instructions with pics on how to do this??
there was a howto somewhere if you have a look around or try the other commodores site
wagon_wheel did the write up, and i believe its still in the how-to section.
its not hard to do.. measure twice, cut once!