Pink wire on O2 sensor?

[SKNOT9]

Ok today i tried to cut me pink wire on the O2 sensor loom, but i couldnt find it. Is it a very obvious pink? or like a skin coloured pink? im partially colour blind so that may be it. Is it the wire on the end? like there are four wires in a row, so is it an end one? or in the middle somewhere. please help!!

[Surfwagon]

For some reason the wire colors are different on the sensor end to those in the loom.
You need to find the pink wire in the loom before the plug and then cut the matching wire on the sensor side of the plug.
This is so you don't ruin the loom in case you can fix the earth problem

[immortality]

For some reason the wire colors are different on the sensor end to those in the loom.
You need to find the pink wire in the loom before the plug and then cut the matching wire on the sensor side of the plug.
This is so you don't ruin the loom in case you can fix the earth problem

correct, from memory the wires from the sensor to the plug are 2x black and 2x purple. as above, check the wiring before the sensor plug. it is a fairly dull pink so may be difficult to see also

[SKNOT9]

yeh i am talking about the wires on the loom, i cant see which one is pink, is it on the end?

[Not_An_Abba_Fan]

Open up the tape a bit more so you can see the clean wires. You can't miss the pink one.

[Surfwagon]

I think there are 2 black, 1 brown and 1 pink.