just a ballpark figure, how much does a conversion from auto to manual cost
and is it even do-able??
you dont turn a holden off
you power it down!
for any one who asks, holdens dont leak oil, there marking there territory
I'd figure $1200 - $1800 minimun though less if you have contacts. But as you're in NZ you'll probably need to add 50% unless you have a mate over the pond.
hahahaha sounds about rite lol
any kiwis know of any places were thell convert an auto to manual?
you dont turn a holden off
you power it down!
for any one who asks, holdens dont leak oil, there marking there territory
drury car parts sell everything you need to convert to T5 for $2000 but i think it's for a V8 conversion.
the VS is a pain to convert because of the 4l60e (electronic) trans. not only do you need to do the mechanical conversion, you also need to either get manual PCM and loom or use the auto PCM/loom with a modified tune (memcal). if you go for the conversion don't get a memcal from torque performance (in auckland) he's a rip-off. best to talk to Dr Bob. mechanically the conversion is fairly simple. best to try and find a VN/VP with a manual and get the complete car(except VN s1), then you basically have all the parts for the mechaincal part. they come up occasionally in the T&E for anywhere from $500 - $1000
Body by Holden, Soul by Brock
the Legend will live forever
VN exec T5: 15.1sec @92.2mph 1/4 mile, 9.7sec @ 74.6mph 1/8mile, 2.3sec 60ft, 0-60mph 6.827sec 22/11/07 Gtech competition
hay mate i reciently bought a vr manual conversion kit of ebay for $610 from a wrecker. The lowest price u would b looking at is around $500 and it's probly been through hell.
Im just glad i can now get rid of the stupid auto as the gears don't draw out enough for my liking.
Took myn to a mechanic friend who did it all for me, whole thing including installation with mostly new parts was $2000.
can you pick up all the parts for a manual conversion from a wreckers, then get someone to do it?
addicted to commodores
check trade me now for a V6 5speed conversion, buy now is $750 i think. however the flywheel looks to be a s1 VN V6 jobbie so you would need te aquire a s2 flywheel and clutch. then all you gotta worry about is a memcal to suit a VS manual conversion with auto loom
http://www.trademe.co.nz/Trade-Me-Mo...-204132276.htm
Last edited by immortality; 24-02-2009 at 02:14 PM. Reason: add link
Body by Holden, Soul by Brock
the Legend will live forever
VN exec T5: 15.1sec @92.2mph 1/4 mile, 9.7sec @ 74.6mph 1/8mile, 2.3sec 60ft, 0-60mph 6.827sec 22/11/07 Gtech competition
wicked thanks heaps bro!!
this migh be a silly question but, is there a 6 speed maunal that bolts on? or can i only go for 5 speed vs transmissions??
you dont turn a holden off
you power it down!
for any one who asks, holdens dont leak oil, there marking there territory
also seeing as i have no idea what im doing when looking for a transmission, what should i look out for
remember my car is a 95 vs commodore
also will i still have to have the trans cooler etc?
im guessing that most of these manual gearboxes are tough enough for track days?
Last edited by PSYKO PHOENIX; 26-02-2009 at 07:14 AM.
you dont turn a holden off
you power it down!
for any one who asks, holdens dont leak oil, there marking there territory
hey mate, ive found this guy on trademe, hes got a vs manual trans and will install it for around $2,500
whatta ya reckon? any good, good price etc??
VR V6 T5 5 Speed Manual Conversion kit for sale - TradeMe.co.nz - New Zealand
cheers bro
you dont turn a holden off
you power it down!
for any one who asks, holdens dont leak oil, there marking there territory