VS cut out now won't start

[maldotcom2]

I was driving along and my engine hesitated and i heard a little "bleep" noise and some lights came up then the engine stalled. It restarted fine and i got home, put it in park and it stalled again. Now it won't start at all, no lights on the dash, no fuel pump. Nothing at all.

Any ideas?

[-=ApheX=-]

Hey Mate,
Dosn't sound good, but i would start by looking at the errors codes that are logged, there's a how to section you should check out first, once you have something to go on let us know...
As it is now what your describing could be a large number of issues.
Good luck mate!

[maldotcom2]

Just had NRMA out. They said there's "no accessory feed to (through?) the ignition" and that it's an auto electrician job. I know how to check for error codes but how would that work if there's no dash lights?

[moff_man]

check your main fuse it may have blown, or even check the feed wire coming from the alternator

[maldotcom2]

Got it fixed. It was a burnt out wire connection on the alarm.

[WhiteOx]

Got it fixed. It was a burnt out wire connection on the alarm.

Did you find out why the wire burnt out in the first place?
Coz if you didn't it might burn out again.

[maldotcom2]

The auto electrician said it was one of the wires in the alarm (aftermarket) that carries a lot of current, and it doesnt take much to burn them out. He put in a much bigger connection so it won't be a problem anymore.