??removing indicators??

[slappedvr]

hey guys i just bought clear oval indicators for my vr and i cant get the old ones on the side? how do i get them off
cheers jordan

[hsvpunk]

they should unclip from left to right. and then clip in from right to left.
If it is getting abit stuck, try a bit of fishing line on one corner of the old sqr one.
( do that from left to right, so it slide the weird clip thing )

[dbarnes]

be careful not to drop the wiring into the guard as well ...bitch to get out

[holden-4-life]

be careful not to drop the wiring into the guard as well ...bitch to get out

haha yeah i did it.. woops.

[-=ApheX=-]

speaking of indicators, what about the removal of the idicator assembly from the headlight?
do you need to remove the entire light assembly or?
Sorry for highlacking thread, but i figure it's a valid indicator question also

[r_i_d_a_h]

so you want to remove the front indicator??

if so you will need to..remove the front bar first and then find the bolts that hold the headlight in and unscrew the indicator assembly off the headlight.

[STEALTHY™]

easiest way is stand facing the rear of the car. Grab the 'rear' of the indicator, and pull outwards and to the front at the same time, and they will clip out. Put the other back in the same way, the 'front' part of the indicator first, then push in at the rear.

[GAMBLR]

Stealthy has got it spot on. look in the manual if you get stuck after that, under replacing globes