NZ VR Wagon Full Povo spec
1st regd. October 94 *now deregd dammit, cops took the plates off the last owner.
15' factory steel rims with cheap chinese 205/65r15 tyres - no hubcaps
pale blue with a few supermarket carpark 'blemishes'
Spanish waiter windows
Majorly saggged roof lining
3800cc's of buick sixpack with 188*** kms on it
T5 - ohh yeah
3.08: open diff
Not quite sure as to what its fate is going to be yet, rescued from under a tree a couple of days ago- dropped the battery out of 34G in it and it went first kick, no nasty noises, i'll go over it thoroughly and see what i will have to do to get it up to scratch for putting back into the system, if its worth it it'll become my daily + tow car for 34G and mule for getting a handle on tuning these things and trying mods out to see if they might help me on the track.
I've got a VP sedan LSD rear end to rob the centre out of and a set of 3.45 gears that i might cobble up for it to make it haul a trailer with a racecar on it a bit easier as well as the improved acceleration
Parts needed
right hand taillight - reverse light lens broken
pics to come for a laugh
COOK COUNTY PERFORMANCE porting heads/manifolds & blueprinting. tuning by DELCOWIZZID
WANTED SV3800 headers for 34G, need stockers as made by HM headers ~ used with patina prefferable for scrutineering
on holiday
i know someone with live wagon plates mateyou sure its not a vn LOL
I tune the oldschool way fear on the passengers face and knuckle colour cant go wrong
tabbacco is still my favorite vegetable
Haha funny that so do i. cost a small fortune to get it up to my place though
COOK COUNTY PERFORMANCE porting heads/manifolds & blueprinting. tuning by DELCOWIZZID
WANTED SV3800 headers for 34G, need stockers as made by HM headers ~ used with patina prefferable for scrutineering
on holiday
bring a trailer its going cheap we could maybe deliver it needs gone asap
I tune the oldschool way fear on the passengers face and knuckle colour cant go wrong
tabbacco is still my favorite vegetable
Heres its best side.
Full Frontal
Donkey
One for delcowizzid.
not too sure of the made in Singapore lol
COOK COUNTY PERFORMANCE porting heads/manifolds & blueprinting. tuning by DELCOWIZZID
WANTED SV3800 headers for 34G, need stockers as made by HM headers ~ used with patina prefferable for scrutineering
Heres its best side.
Full Frontal
Donkey
One for delcowizzid.
not too sure of the made in Singapore lol
COOK COUNTY PERFORMANCE porting heads/manifolds & blueprinting. tuning by DELCOWIZZID
WANTED SV3800 headers for 34G, need stockers as made by HM headers ~ used with patina prefferable for scrutineering
made a right arse of that didn't i !!!!!!!!!!!
COOK COUNTY PERFORMANCE porting heads/manifolds & blueprinting. tuning by DELCOWIZZID
WANTED SV3800 headers for 34G, need stockers as made by HM headers ~ used with patina prefferable for scrutineering
on holiday
haha its even the same colour
I tune the oldschool way fear on the passengers face and knuckle colour cant go wrong
tabbacco is still my favorite vegetable
on holiday
got more ported heads may do a deal
I tune the oldschool way fear on the passengers face and knuckle colour cant go wrong
tabbacco is still my favorite vegetable
Maate!!
On my bench now are three pairs of V6 heads i need to finish (yes including yours), last week i had a ministock motor dropped off for a full build, 34G hasn't been touched yet + dayjob + family + having a life +
What i really need is :
Time:
More heads to Port:
Money
and now i've read that a stiff drink
COOK COUNTY PERFORMANCE porting heads/manifolds & blueprinting. tuning by DELCOWIZZID
WANTED SV3800 headers for 34G, need stockers as made by HM headers ~ used with patina prefferable for scrutineering
on holiday
More heads to Port: check set in my boot still LOL have spare engine with a set on too
I tune the oldschool way fear on the passengers face and knuckle colour cant go wrong
tabbacco is still my favorite vegetable
Aww eh? can't see that far man!
COOK COUNTY PERFORMANCE porting heads/manifolds & blueprinting. tuning by DELCOWIZZID
WANTED SV3800 headers for 34G, need stockers as made by HM headers ~ used with patina prefferable for scrutineering
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote
