Voot Voot noise & Vibration when doing 100kph

[Stoker]

Hi, I have a VX Commodore Series 2 2002 and when I'm doing 100kph I get a voot voot noise coming from the front. There is also a slight vibration every time it makes that noise. When doing that speed and going around a left hand bend the noise goes away, but then when it straightens up noise comes back again, then when going around right hand bend noise does not go away. I have put in new lowered spings, shocks, radius rods & bushes, control arm bushes and I changed the left front wheel bearing hub and the noise is still there. any ideas on what it could be?? Should I possibly change the right Front Bearing hub as well??

[kizza_VL]

G'day mate, i have a vx commodore too, and i had a vibration and stuff at 105ks + and i took it too holden and it ended up being that my crossmember had moved a tiny bit.

[Stoker]

Thanks for the reply, So did the crossmember need to be replaced?

[pablo]

Check that one (or both) of your engine mounts have not sagged, causing the sump to vibrate against the cross member!

[kizza_VL]

sorry for the late reply. But no it didn't need replacing. They just losened it off and straightened it up.

[6-PAC-ATTACK]

Hi, I have a VX Commodore Series 2 2002 and when I'm doing 100kph I get a voot voot noise coming from the front. There is also a slight vibration every time it makes that noise. When doing that speed and going around a left hand bend the noise goes away, but then when it straightens up noise comes back again, then when going around right hand bend noise does not go away. I have put in new lowered spings, shocks, radius rods & bushes, control arm bushes and I changed the left front wheel bearing hub and the noise is still there. any ideas on what it could be?? Should I possibly change the right Front Bearing hub as well??

Check for grease spray around your cv joints could be them