Electric Window Regulator

[JustCrusin09]

A couple of weeks ago the electric window (front passenger side) on my VT Commodore packed it in. I decided to have a crack at fixing it myself. With guidance from this forum I've been able to get to the point where the regulator is installed.

I can't however work out how the regulator locks into the glass so that it moves it up and down.

Any help would be most appreciated.

[banga]

you have the 4 arms with the little white plastic slider things on them you just put them into the slide things that are part of the window , ... i sure hope someone with the gift of explaining things can come help you better ,

[accentstencil]

A couple of weeks ago the electric window (front passenger side) on my VT Commodore packed it in. I decided to have a crack at fixing it myself. With guidance from this forum I've been able to get to the point where the regulator is installed.

I can't however work out how the regulator locks into the glass so that it moves it up and down.

Any help would be most appreciated.

You have to make sure you have the window sliders in the tracks before you rivet the regulator into place. It is easier if the window is about half way up when doing this. The pivot plate (the small track thing) is done last.

[JustCrusin09]

I can see two tracks at the bottom of the window. Are there any others?

Can you tell me which arms go in which track?

Thanks.

[banga]

heres a post that has a pic it may help help with my window cross arm clips

[holdenvtman1123]

you can get new white nylon slides for about 4 bucks each its worth putting new ones in while your there

[donz]

Yeh just happend to me yesterday. Put a nice big scratch on my tint too!!! :-(

[JustCrusin09]

Thanks guys. With the aid of your responses (especially the photos) I've been able to complete installation of the the regulator. The power window works perfectly once again!

[banga]

heh great, its a bit frustrating installing the sliders but its a relief when the job is all done isnt it , next time itll take a 1/4 of the time

[iamtheman74]

My nylon sliders went today. Might be a stupid question, but where did you guys source the nylon sliders from? holden spare parts?

[banga]

yeah mate they are only 3 bucks each