holden vt wont start

[bryso9590]

hi well heres whats happening when i turn the key only the dash lights come on no sound in the engine bay but the ignition relay clicking but nothing else put a new starter moter in it new thing round ignition barrel where the key touches the imobilissor turns off when i unlock car and comes on when i lock it so it cant be the key cause i have read else where about it could be the key i have bridged the starter relay and it cranks over then but wont start its like theres no power to the fuse panel under the bonet i have tested for power and everythings fine help

[glowworm]

there are so many post on here that can help you just go look for them ,,

[GR3GA]

so it cranks? but jus wont start?

wat motor? ecotec?

if it cranks but jus wont start it could be ur CAS - crank angle shaft sensor

[bryso9590]

i will have to get someone to come out with tec 2 see if it brings anything up i have read all things on here relating to it but still nothing

[Spike_109]

Had the same problem yesterday.. Disconnect battery terminals and clean. Re attatch and VAS up.

Worked for me.

[bryso9590]

ill try that just want to get the stupid thing going