replacing vx plenum what to tighten bolts to

[MR_VX]

im replacing the plenum on my vx with a port and polished one the question is do i just tighten the bolts as normal or do they have a specific torque wrench setting?

[accentstencil]

The plenum chamber to inlet manifold bolts have a torque setting of 10-14Nm, which is not much. Spark plugs have a setting of 15-25Nm, so just do up the bolts almost as tight as a spark plug and you should be right.

[MR_VX]

sweet as thanks mate