oil catch can

[brockee]

hey ppl we hava vx senator ls1 was just wondering whats the best way to hook up custom oil catch can cheers brockee!!!!!

[HARVZ-6]

I cant help but ask,,

why do you want to run a catch can?

[brockee]

more for looks really its a custom made catch for vt vx mountd where air box was so it was just an emtpy spot really cheers

[brockee]

any help guys lookd at heaps of pics and every setup is different every things done but what hoses go where

[GMMAD]

I cant help but ask,,

why do you want to run a catch can?

having oil go in the combustion side isnt good
for 1. it leaves a oil residue in the TB and manifold
and 2. lowers the octane rating of your fuel having oil go in with it
its better off in a catch can then in the induction


this is how you connect it up on pre VX2

[HARVZ-6]

If your having alot of blowby youve got more issues than losing a tiny amount of octane...

i just dont see the point putting it on a street car,, the amount of pass by is minimal unless the engine is copping a hard time...

[GMMAD]

If your having alot of blowby youve got more issues than losing a tiny amount of octane...

i just dont see the point putting it on a street car,, the amount of pass by is minimal unless the engine is copping a hard time...

you dont have a catch can because of having blowby

you will get oil in the induction in a good engine
and i would rather to catch the oil in a catch can then it going in my engine
it may be minimal but still better a black TB and intake stained by oil

[HARVZ-6]

the oil residue is because of crankcase venting, blowby will cause excess oil etc


The only reason its sent into the intake is so its burnt for emissions

[GMMAD]

the oil residue is because of crankcase venting, blowby will cause excess oil etc


The only reason its sent into the intake is so its burnt for emissions

i know blowby will cause it to be worse
but LSx's will get oil in the intake regardless of this
as I said even a healthy motor will get it