VT - VX Roof Headlining, how do i take it off?

[ruggj]

Did a quick search and couldn't really find anything, closest was
HOW TO replace headlining - Very detailed

I'm trying to find out how to take off the headlining in my VX, so i can run some wire to the interior lights.

Can i follow the steps in the above thread, just taking it off, or is there more involved for a VX?

Any information would be great


Thanks, Jarrod

[Ozzie]

Unscrew and unclip all the piller trims that are holding it up and take them off. (all the plastic around the roof)
Take the interior light and sun visors out.
The roof lining will fall out.

[ruggj]

Unscrew and unclip all the piller trims that are holding it up and take them off. (all the plastic around the roof)
Take the interior light and sun visors out.
The roof lining will fall out.

thanks mate for the info, really appreciated.

[Denno]

Post some photo's while/when you've done it, and any problems you encounter please .

[ruggj]

well worked out great, was able to run the wire i needed from the head unit to in front of the interior light, again many thanks ozzie, really helped, was just a matter of figuring out what i had to take off, taking it all off was just too easy.

Denno i took a few photos but i'll upload tommorow. Basically i took off the sun visors, then the interior light, then the roof handle for the passenger side (was all i needed as i was running the wire from the passenger side), and it just came off, there was no screw in the main pillar so i could just pull it off. Only other things i had to do, which was because i was trying to run a wire, was take off that part where when the door closes it meets with, dont know what to call it lol, and i took the glovebox out for easier access (which was good because i was able to fix the glove box). So i managed to get a few things done in a short amount of time.

Again, thanks ozzie.