bypass vx v6 bcm?

[v6rodeo person]

hi guys,
i have put a vx v6 into a rodeo, and at the point where i am starting. i have spark etc and power to the injectors, but no pulse...
from what i have read it is the bcm causing this, only problem is im not using one.
so i was hoping there was away of tricking the ecu into thinking it is all ok?
there were 3 wires that i couldnt find where they go so was thinking they may connect to the bcm, ill try and get my hands on a diagram and have a look through also.
thanks very much
brad

[Not_An_Abba_Fan]

The BCM controls the security so I'd say it is an immobilisor issue. Just hook up the BCM and it should all fire up.

[v6rodeo person]

yeah, i only have the ecu and engine loom no other electricals.
i read a few other posts that said "the auto elec just bypassed the bcm" etc, was hoping someone may now if its possible.
had a quick chat to the local auto elec he said he heard a rumour about possibley oppening the ecu and disconnecting something... anyone else hear of this?
thans brad

[wamboin23]

you'll be looking at either a BCM simulator, or a custom tune to disable the VATS (vehicle anti theft system)

[deanos70]

Mate try
Pat gardner V6conversions , google v6conversions, he does a bcm simulater , hes in moree nsw,

or marks adaptors will do them

part gardner is cheaper

[GMMAD]

you will need the VATS turned off for it to run