vx brake pads

[PUSHIN]

hey, did a quick search, nothin came up, just wondering how to get pads back into a vx. cheers guys

[HARVZ-6]

if you can, get some line clamps and clamp the rubber hose going to the caliper and release the bleeder screw and either lever or use a g clamp to push the piston back in

you can do it without clamping the line but pushing the sh*t fluid from the bottom of the lines can scr*w your abs modual

[Tom_1569]

I always use a G-clamp with an old pad to push the piston back in, never had a problem, and is definitly the easiest way. If you have "shit" fluid, then its probably time to flush your brakes more then anything.

[burnz]

DO NOT clamp the brake line's.
simply push the pistons back.

my method:
with the old pads in the caliper, use two large screw drivers or shifter handles.
and criss/cross for leverage to push the pistons back symiltaniusly.
(you will damage the old pads)

[PUSHIN]

cheers guys, got done thanks allot.