Results 1 to 17 of 17

Thread: VT Won't Start!!

  1. #1
    Ride
    VT Executive V6

    Join Date
    Oct 2009
    Posts
    8

    Angry VT Won't Start!!

    Hey,
    Just looking some advice ive got a problem with my VT not sarting, i have been reading through posts and getting crank angle sensor, BCM, Fuel pump, fuses, battery terminals, loose wires..

    Went to the shop and came out 5mins later to the car not starting for me, it will crank over but not fire up, the key buttons have stopped working to lock, unlock and pop the boot, so i thought the battery had died in the key fob, went got the spare and still didnt work either, cleaned the key and around the connections to the ignition barrel thinking it wasn't makeing a good connection for the immobiliser, still doesn't work! when i turn the key to start it the immobiliser light goes off, checked fuses, battery terminals and for loose wires and all looks ok, left the key in on position for 2hrs to override the security system as stated in the handbook and this failed also, still cranking but not firing..

    (98 VT Execetive 3.8l Auto)

    Any ideas?

    Thanks

  2. #2
    Ride
    VX Commodore Acclaim S1

    Join Date
    Nov 2008
    Location
    Goulburn NSW
    Posts
    75

    Default

    could be a faulty ignition barrell?
    Quote Originally Posted by Jecs View Post
    its a nice day for a jog. so jog the f**k on.

  3. #3
    Ride
    wh v8 stato

    Join Date
    Mar 2009
    Location
    Kempsey, NSW
    Posts
    20

  4. #4
    Ride
    VT Executive V6

    Join Date
    Oct 2009
    Posts
    8

  5. #5
    Ride
    VT Commodoore '98

    Join Date
    May 2009
    Posts
    40

    Default

    Do the interior lights and headlights work? I'm having the same problem but i'm guessing mines the battery because i got no electrics.

  6. #6
    Ride
    VT Executive V6

    Join Date
    Oct 2009
    Posts
    8

  7. #7
    Ride
    98 vt s pac

    Join Date
    Feb 2009
    Location
    Corowa NSW
    Posts
    239

    Default

    i had the exact same problem mate it was my key, i had to pay holden $50 to reprogram it then everything was sweet!!

  8. #8
    Ride
    VT Executive V6

    Join Date
    Oct 2009
    Posts
    8

    Default

    If it was only it was something as simple as a key... my spare doesnt work either. I just done the error code check on it and got 12... one flash followed by two short flashes.. but i had my batt disconnectd over nite so not sure

  9. #9
    Damo304's Avatar
    Damo304 is offline Donating Member
    Ride
    VT SS 5 LITRE

    Join Date
    Apr 2009
    Location
    Perth, WA
    Posts
    25

    Default

    it may just be a fuse, have a look at the bcm fuse underneath the steering wheel or the engine cont. fuse under the bonnet i think they are 10 amp

  10. #10
    Ride
    98 vt s pac

    Join Date
    Feb 2009
    Location
    Corowa NSW
    Posts
    239

  11. #11
    Ride
    VT Executive V6

    Join Date
    Oct 2009
    Posts
    8

    Default

    lol i was just googleing for a how to but cant find anything.. just for a temp job to get me about

  12. #12
    Ride
    VT Executive V6

    Join Date
    Oct 2009
    Posts
    8

  13. #13
    Ride
    98 vt s pac

    Join Date
    Feb 2009
    Location
    Corowa NSW
    Posts
    239

    Default

    Quote Originally Posted by man_84l View Post
    lol i was just googleing for a how to but cant find anything.. just for a temp job to get me about
    you need some 12v wire and pull out the start relay from memory its the left and right pins you need to connect not the top and bottom

  14. #14
    Ride
    VT Executive V6

    Join Date
    Oct 2009
    Posts
    8

    Default

    starter relay under the bonnet?... left and right pins on the back of the ignition barrel?.. this right?..

  15. #15
    lion_g is offline LionG
    Ride
    VT Executive Series II 3.8/V6

    Join Date
    Jun 2009
    Location
    T'Ville
    Posts
    65

    Default

    crank angle sensor if its firing but not starting and ur lights are all on.
    crank angle sensor

  16. #16
    Ride
    VT Executive V6

    Join Date
    Oct 2009
    Posts
    8

    Default

    would the CAS stop the car from remote locking/unlocking the doors?... Spare and my everyday key has stoped

  17. #17
    Ride
    98 vt s pac

    Join Date
    Feb 2009
    Location
    Corowa NSW
    Posts
    239

    Default

    left and right pins from where you removed the start relay

LinkBacks (?)

  1. 08-11-2009, 11:22 AM

Similar Threads

  1. where to start
    By dobbie in forum VL Holden Commodore (1986 - 1988)
    Replies: 9
    Last Post: 01-04-2006, 12:57 PM
  2. Vp 93 Will not Start..
    By johhny cake in forum VN - VP Holden Commodore (1988 - 1993)
    Replies: 2
    Last Post: 08-03-2006, 06:37 PM
  3. Won't start without "start ya bastard"
    By Steven M in forum VL Holden Commodore (1986 - 1988)
    Replies: 6
    Last Post: 08-11-2005, 12:12 PM
  4. Can't start cold except for clutch start.
    By Holdfast in forum VT - VX Holden Commodore (1997 - 2002)
    Replies: 2
    Last Post: 19-08-2005, 07:30 PM
  5. car won't start
    By Terfade in forum VN - VP Holden Commodore (1988 - 1993)
    Replies: 5
    Last Post: 22-06-2005, 06:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72