how to remove sway bar VT VX

[kalu]

how to remove the sway bar ( not the sway bar link) in a VT VX?

do i need to remove the cross member bar to take it out?

also will i vx sway bar fit a vt sway bar?

vx sway bar got 2 boll joints in the link
vt sway bar got all rubber bushes

[accentstencil]

I've never had to remove a stabiliser bar but according to my manual the crossmember needs to be removed.

[kalu]

hey

thanx mate, you are right

ou have to drop the cross member bar (K frame) where the engine mounts are connected tooo so ***en big job...

pedders said they have a VZ style 2 ball joint sway bar link .... $180 for the pair

might look in to it next few days ey

ta

[danja]

Yeah it is a big job, recommend getting a professional to do it because it all needs to get aligned properly when its reassembled, and a good shop will have the tools to do that.

Also remember that the VZ links will only fit VZ-style shocks, so if you plan to use the VZ links you'll have to change them too.

[GMMAD]

Yeah it is a big job, recommend getting a professional to do it because it all needs to get aligned properly when its reassembled, and a good shop will have the tools to do that.

Also remember that the VZ links will only fit VZ-style shocks, so if you plan to use the VZ links you'll have to change them too.

you can get double jointed link pins for pre VZ

[danja]

you can get double jointed link pins for pre VZ

As in an L shaped link with ball joins at both ends?

[TIGEN3]

I have just got a vx vy ball joint type sway bar with the correct link pins to go on my 10 year old vt ss as they are a bit tired and thought i would do it today and found out the hard way that you cannot remove old sway bar apparently without supporting the engine with hoist drop k frame and slip out old in with new!! will do when i have more . I have the manual to refer to but it didnt read like that the first time i read it hope this helps..

[joshyewahh]

im currently attempting to remove my old sway bar n put in the whiteline 30mm adj bar... reading this... i think ill get it done profesionally...