VY/VZ Cruise conttrol stalk in VT.

[KillerCV8]

Hi There,

Does anyone know if the indicator (WITH cruise control) stalk from the VY/VZ will fit a VT ?

The VT one is bulkt carriied over from VR/RS styling and has horrisd buttons.

I much prefer the later ones on the VY/VZ. Has anyone tried to fit a VY/VZ stalk into a VT ?

Regards & Cheers

[feistl]

Why VY/VZ?

The VX Series II and WHII will fit, and have the proper twisting cruise control...

Not 100% sure if they'll fit (they should...)

[WAGON MAN]

Why VY/VZ?

The VX Series II and WHII will fit, and have the proper twisting cruise control...

Not 100% sure if they'll fit (they should...)

VY/VZ cruise control is identical to VX series II.

It will fit but will require some wiring modifications as the plug is different.

[PaulSV6]

It will fit but will require some wiring modifications as the plug is different.

Either that, or you'll have to change over the wiring loom.

[WAGON MAN]

Either that, or you'll have to change over the wiring loom.

But would the new section of cruise/indicator loom fit the existing main wiring loom?

[DanVN]

I remember there being a guide to re-wiring for the VX2 stalk, anyone know where it is?

Bought one this avo and would like to throw it in

[WAGON MAN]

Here you go Dan VN.

Remember search is your friend.

VX 2 to VX 1 Cruise Stalk Conversion

[DanVN]

i searched, but didnt find it till page 6, forgot to say id found it :P

Now to find blade connectors small enough to fit on the stalks one's .....

[mwb235]

i searched, but didnt find it till page 6, forgot to say id found it :P

Now to find blade connectors small enough to fit on the stalks one's .....

When i was looking for small blade connectors for my VR at the auto shop, the salesperson suggested i use "speaker terminals" which are just the right width. It worked a treat and had lasted without problems right up until i sold the car five years later.

I did the same on my VT, but shortly therefater i wired in some actual stalk wiring plugs off a VY/VZ wreck, from which i'd cut off the plugs. Although a lot of wreckers won't let you do it (unless they keep damaged harneses) some will such as Pick 'N' Payless at Blacktown (western Sydney) which is where i got mine.

[DanVN]

Got mine all done this afternoon, instead of cutting plugs off my cars loom we made a little patch harness from the old plug to the new stalk