Which is the right rear camber kit???

[holden_4aw_lyfe]

i have a vt berlina, and have fitted SSSL springs on the rear, now the wheels lean in quite a lot towards the car and my tyres get chopped out. i bought a nolathane 2 point camber kit off ebay and dont understand how this is going to solve my problem and make the wheels square again?? is there anything else available that will solve the problem???

here is the camber kit i purchased:

HOLDEN COMMODORE VT-VX-VY-VZ REAR CAMBER KITS - eBay Other, Suspension, Steering, Car Parts, Accessories, Cars, Bikes, Boats. (end time 20-Mar-10 20:20:27 AEDST)

[acarmody]

Gonna need a 4-point kit for a VT mate. Get the right kit and get it installed properly, then take it to a wheel alignment joint and they will do all the adjustments there.

[MR_VX]

so does vt'd need a 4 point kit and vx need a 2 point???? im not sure some one fill me in there?

[acarmody]

VX Series 2 only need a 2 point kit. VTs and VX Series 1 need a 4-point. But if you go really low then I believe that a 4 point kit is needed as the factory adjustment fittings don't have a great amount of leeway.

[MR_VX]

righto thanks for clearing that up

[chargedvx6]

i have a vt berlina, and have fitted SSSL springs on the rear, now the wheels lean in quite a lot towards the car and my tyres get chopped out. i bought a nolathane 2 point camber kit off ebay and dont understand how this is going to solve my problem and make the wheels square again?? is there anything else available that will solve the problem???

here is the camber kit i purchased:

HOLDEN COMMODORE VT-VX-VY-VZ REAR CAMBER KITS - eBay Other, Suspension, Steering, Car Parts, Accessories, Cars, Bikes, Boats. (end time 20-Mar-10 20:20:27 AEDST)

I'd give that camber kit a miss. It looks like an el cheapo road safe brand kit nit Nolathane. Whiteline or Superpro 4 point kits are the go.

[acarmody]

+1 for Superpro. I believe that GSLRallySport can get Superpro products, hit them up.