Results 1 to 12 of 12

Thread: VT Hazard light switch - is it supposed to light up at night?

  1. #1
    Ride
    vt ss commodore series 2

    Join Date
    Sep 2009
    Location
    Geelong, Aus
    Posts
    75

    Default VT Hazard light switch - is it supposed to light up at night?

    Hello all,

    as the title of this thread suggests I was wondering if my hazard light button is supposed to light up at night? I have a mate who has a vx and theirs lights up red so i was wondering if mine is supposed to light up or do I just buy one from a vx?
    Last edited by tigass; 10-06-2010 at 02:07 AM. Reason: Typo

  2. #2
    Ride
    '98 vt berlina

    Join Date
    Feb 2010
    Posts
    78

    Default

    my lights up red when i put on the headlight. if it's the same like other instrument and switches in the car there's should be a globe inside the switch itself, and they do blow. the last time i replaced one in the lpg/petrol switch it cost about $5 from holden. the real trouble is getting the switch out to replace it.

  3. #3
    MikeCuzzy's Avatar
    MikeCuzzy is offline How hard can it be?
    Ride
    2007 VE Omega 3.6L & 1998 VT Executive 3.8L

    Join Date
    Jan 2010
    Location
    Wollondilly, NSW
    Posts
    1,189

    Default

    If your headlights are on, it is supposed to be on. Though you light must be blown. You can take it too holden or do it yourself I guess, you'll need to take the dash off to do it though.

    The New Ride - The Class 2 Shuttle Craft (VE)


    I'll be he comes to get you, some shopping trolley kind of thing, that gets you where your going nice and slow... Well off you go that's fine, the pleasure's all mine.
    When I light the nitro on my HQ 454 Monroe!


  4. #4
    Ride
    vt ss commodore series 2

    Join Date
    Sep 2009
    Location
    Geelong, Aus
    Posts
    75

  5. #5
    WAGON MAN's Avatar
    WAGON MAN is offline Gas Sleeper
    Ride
    VX S2 Berlina Wagon with Phreddied bits.

    Join Date
    Jun 2006
    Location
    North Coast , NSW
    Posts
    1,059

    Default

    It would be better to source a new globe, than purchasing a second hand switch.
    I like my roo well done

  6. #6
    Ride
    vt ss commodore series 2

    Join Date
    Sep 2009
    Location
    Geelong, Aus
    Posts
    75

    Default

    Hmmm so i'm guessing then that the globe is easy to remove out from the switch or easier to replace the whole switch?

  7. #7
    WAGON MAN's Avatar
    WAGON MAN is offline Gas Sleeper
    Ride
    VX S2 Berlina Wagon with Phreddied bits.

    Join Date
    Jun 2006
    Location
    North Coast , NSW
    Posts
    1,059

    Default

    The globe is easy to replace.

    Remove dash fascia, disconnect switch ,replace globe , re install.

    Either way to replace the globe or switch you will have to remove the dash fascia.
    I like my roo well done

  8. #8
    Ride
    vt ss commodore series 2

    Join Date
    Sep 2009
    Location
    Geelong, Aus
    Posts
    75

    Default

    Ok then, globe it is. I guess that way I can be certain that the globe works. Better that than getting a whole switch, installing it and then only to find that the globe is blown in that switch too

  9. #9
    WAGON MAN's Avatar
    WAGON MAN is offline Gas Sleeper
    Ride
    VX S2 Berlina Wagon with Phreddied bits.

    Join Date
    Jun 2006
    Location
    North Coast , NSW
    Posts
    1,059

    Default

    Quote Originally Posted by tigass View Post
    Better that than getting a whole switch, installing it and then only to find that the globe is blown in that switch too
    Or to have to replace the globe in the secondhand switch in the near future.
    I like my roo well done

  10. #10
    Ride
    VX SS SERIES II

    Join Date
    May 2005
    Location
    melton, vic
    Posts
    118

    Default

    Just leave it doesnt matter if it doesnt light up, my traction control light doesnt light up at nite. How often do u press the hazard switch anyway? if u break down at nite all that will happen is that it mite take a fraction of a second longer to run ur hand over the area its meant to be before its found and pressed not worth the effort replacing unless u really have that bad OCD a globe in a button thats barely ever pressed isnt lit up that its making u bite ur fingernails off and go crazy u have bigger problems than a blown globe

  11. #11
    MikeCuzzy's Avatar
    MikeCuzzy is offline How hard can it be?
    Ride
    2007 VE Omega 3.6L & 1998 VT Executive 3.8L

    Join Date
    Jan 2010
    Location
    Wollondilly, NSW
    Posts
    1,189

    Default

    Quote Originally Posted by mike_is_bored316 View Post
    Just leave it doesnt matter if it doesnt light up, my traction control light doesnt light up at nite. How often do u press the hazard switch anyway? if u break down at nite all that will happen is that it mite take a fraction of a second longer to run ur hand over the area its meant to be before its found and pressed not worth the effort replacing unless u really have that bad OCD a globe in a button thats barely ever pressed isnt lit up that its making u bite ur fingernails off and go crazy u have bigger problems than a blown globe

    But it doesn't look good... geez! :P

    The New Ride - The Class 2 Shuttle Craft (VE)


    I'll be he comes to get you, some shopping trolley kind of thing, that gets you where your going nice and slow... Well off you go that's fine, the pleasure's all mine.
    When I light the nitro on my HQ 454 Monroe!


  12. #12
    Ride
    vt ss commodore series 2

    Join Date
    Sep 2009
    Location
    Geelong, Aus
    Posts
    75

    Default

    Lol yeah it doesn't look good. Plus I like my car looking and running purrrrfect. Especially when I enter her in competitions and knowing myself she could be better.


Similar Threads

  1. How to bypass the hazard light switch (temp rewiring)?
    By VS Omega in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 2
    Last Post: 27-12-2011, 05:17 PM
  2. VZ Hazard Light Problem
    By Zoltrix77 in forum VZ Holden Commodore (2004 - 2006)
    Replies: 2
    Last Post: 03-08-2010, 01:24 PM
  3. Hazard light button fallen thru!
    By jeza91 in forum VT - VX Holden Commodore (1997 - 2002)
    Replies: 2
    Last Post: 14-02-2010, 10:25 PM
  4. Odd hazard light issue
    By Semaj in forum VZ Holden Commodore (2004 - 2006)
    Replies: 11
    Last Post: 03-07-2009, 11:33 PM
  5. Inside hazard light broken
    By WAC-988 in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 1
    Last Post: 31-10-2008, 10:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72