hey everyone just wondering if anyone has had the same prob, i believe this is the case as when i hear the fam turn on my temp goes up once off again car returns to normal temp any ideas cheers
Current ride: 94 VR Commodore Wagon, Series 1 engine in a Series 2 body.
Wheels: VE SS 19's custom machined to fit VR.
Sound: Kenwood + matching speakers.
but thats the thing its had a new radiator waTER PUMP AND THERMO FLUSHED asweell (soz bout caps) and yeah all done within the past 2 months
may be ya heads leaking, heater tap leaking?.. the machanics can test the water to see if it has exhaust gas's in the water from leaky head..
but the second fan will come on when its overheating, it wont cause it to overheat..
awk so what i just go to a macanics and ask them to check if i have a leaking head?
if the temp is goin up once the fan comes on i would check it is spinning in the right direction, you might have one going the wrong way....
rofl does this happen alot? but also should your collant/water be visable if you were to pull the cap offf, cuz i did so and i couldnt see any and we filled it up with 50/50 anit freeze collant and letes just say took a good 10 secs to fill up?my coolant is leaking maybe?
yes ya water should be visable, but when its overheating and full of water it will make all the water spew out ya radiator cap into overflow bottle so might not hav a leak.....
also check ya cap, the seal could be stuffed and letting water out cap into overflow bottle then running out of water and overheating,
my 3month old cap gave way a few weeks ago , lost $30 worth of 1day old coolant, the bitch, ..
is there a way to test the cap or would you just have to go buy a new one?
sorta, ya could try filling it up and put cap on normal ,
pull the hose off the side of the radiator cap.(overflow)
let it run/idle till get's up to normal operating temp..
and see if any waters being spat out that pipe ya took the hose off from(side of radiator cap)
it should only let water out if its way too hot...
also if you havent already- you have to bleed the water system after its been pretty low on water or can cause air locks and overheating/damage...
shit man i think ill just leave it to the macanics cuz ive been to this other guy and i seriously think he has no idea just atken me for a ride so gunna try a new one but does anyone know of any good place S.E suburbs of melbourne cheers jay