Results 1 to 19 of 19

Thread: VT Roof Lining

  1. #1
    Ride
    1999 S2 VT

    Join Date
    Oct 2010
    Location
    Sydney
    Posts
    32

    Default VT Roof Lining, Oil light coming on

    The roof lining on my car is in good condition but starting to sag.

    Is there a fix that i can do myself and what is it ? OR is it easier to take is somewhere and pay them to do it ?

    Ok now i'm adding a question about the oil light instead of starting a whole nother thread...

    Before i got the car serviced (180k service n replaced a bunch of wearing parts) the oil light would come on for a few seconds when when the stall indicater beeped (revs drop too low)
    The mechanics said they checked out everything relating to the oil pump/pressure but couldnt find the problem (if there is one).

    Got the car back today and now the oil light and stall beeper goes off intermitently(sp) when i'm idling. Needless to say i'm not happy bout that.

    Any ideas anyone ??


    Cheers and Thanks
    Last edited by CommieKal; 14-10-2010 at 10:11 PM. Reason: instead of starting a whole nother thread im adding to this one
    Ask question and your an idiot for 5 min'. Don't ask and your an idiot for life...

  2. #2
    Ride
    VS V6 Manual Wagon / VS V6 Manual Supercharged

    Join Date
    Oct 2010
    Location
    Melbourne
    Posts
    29

    Default

    Older Commodores are prone to it. You could take it to an Auto Upholsterer, Do you know if its just glued to the roof or if its glued to cardboard? They are easy enough to take out, but i dont know how you would go about fixing it.

  3. #3
    Ride
    VT Berlina

    Join Date
    Oct 2010
    Location
    Sydney
    Posts
    327

  4. #4
    Ride
    1999 S2 VT

    Join Date
    Oct 2010
    Location
    Sydney
    Posts
    32

    Default

    where did you get it done and how much was it ? if you don't mind my asking...lol
    Ask question and your an idiot for 5 min'. Don't ask and your an idiot for life...

  5. #5
    Ride
    VT Berlina

    Join Date
    Oct 2010
    Location
    Sydney
    Posts
    327

    Default

    Where abouts in Sydney you from? I got mine done with a bunch of other stuff for 180

  6. #6
    edals's Avatar
    edals is offline Blues Brother # 1
    Ride
    VY 2002 Wagon, VX 2001 Sedan

    Join Date
    Sep 2008
    Location
    QLD/NSW Boardish
    Posts
    1,089

  7. #7
    sxc_sound's Avatar
    sxc_sound is offline getting Kustom
    Ride
    VT Series 2 S pak

    Join Date
    May 2008
    Location
    Parkdale
    Posts
    599

    Default

    Just rip off the factory material and re carpet it, If your awesome put some LED's in there while your at it like i did :P lol




  8. #8
    Ride
    VT Berlina

    Join Date
    Oct 2010
    Location
    Sydney
    Posts
    327

  9. #9
    Ride
    1999 S2 VT

    Join Date
    Oct 2010
    Location
    Sydney
    Posts
    32

    Default

    BPX- im in newtown close to the city. and thats the cheapest i've heard some say they've paid

    sxc-sound - i'm not that awesome hehehe

    edals - Woot thx for the link, dont think im awesome enough for that either...LMAO
    Ask question and your an idiot for 5 min'. Don't ask and your an idiot for life...

  10. #10
    Ride
    VT Berlina

    Join Date
    Oct 2010
    Location
    Sydney
    Posts
    327

    Default

    okay thats cool, im out western sydney i got mine done by my panel beater at arndell park - ultimate refinishes.

  11. #11
    Ride
    1999 S2 VT

    Join Date
    Oct 2010
    Location
    Sydney
    Posts
    32

    Default

    Cool thx mate
    Ask question and your an idiot for 5 min'. Don't ask and your an idiot for life...

  12. #12
    sxc_sound's Avatar
    sxc_sound is offline getting Kustom
    Ride
    VT Series 2 S pak

    Join Date
    May 2008
    Location
    Parkdale
    Posts
    599

    Default

    Holden still sell brand new roof liners for $90, just buy a new one. and there are extremely easy to fit. all the trims around the edge of the roof either unclip or come off with a phillips head screw driver

  13. #13
    Ride
    VT Berlina

    Join Date
    Oct 2010
    Location
    Sydney
    Posts
    327

    Default

    Yer its a simple job butt im not good with gluee.and dont have time for a while

  14. #14
    Ride
    1999 S2 VT

    Join Date
    Oct 2010
    Location
    Sydney
    Posts
    32

    Default

    $90 bucks for a new one from holden sounds pretty good right now.
    Ask question and your an idiot for 5 min'. Don't ask and your an idiot for life...

  15. #15
    Tim Smtih's Avatar
    Tim Smtih is offline Sexy Man
    Ride
    VXS1 Acclaim Family spec Limited Hardcore Edition

    Join Date
    Sep 2009
    Location
    Here.
    Posts
    250

    Default

    What if i couldn't be bothered replacing it myself? Anyone able to recommend someone that will do a fair job in Brisbane?
    http://tinyurl.com/MetalisAwesome

    Only two things are infinite, the universe and human stupidity, and I'm not sure about the former.
    Albert Einstein

  16. #16
    Ride
    1999 S2 VT

    Join Date
    Oct 2010
    Location
    Sydney
    Posts
    32

    Default

    Yeah i was almost at that point but i'd rather save the cash if i can ;-)
    Ask question and your an idiot for 5 min'. Don't ask and your an idiot for life...

  17. #17
    MR_VX's Avatar
    MR_VX is offline Forced to be Fast
    Ride
    VX S pac SII Raptorcharged

    Join Date
    Mar 2009
    Location
    Townsville, Qld
    Posts
    1,784

    Default

    I was gonna repaire mine until i rang my local holden and found out a hole brand new one only costs $75. And yes i did get them to check if it was the right part and price. problem solved
    Check out my ride here >>>>My VX Raptor
    say NO to chev badges
    Wanted To Buy=>> Mace 12mm or 25mm Manifold spacers - VX SS Headlights - VY handbrake complete set up
    For Sale=>> vt/vx Berlina/Calais chrome window surround PM me for more details

  18. #18
    Ride
    99 VT Sedan

    Join Date
    Feb 2010
    Location
    melbourne
    Posts
    592

    Default

    Quote Originally Posted by sxc_sound View Post
    Holden still sell brand new roof liners for $90, just buy a new one. and there are extremely easy to fit. all the trims around the edge of the roof either unclip or come off with a phillips head screw driver
    Is that the complet roof lining ?????

  19. #19
    Ride
    99 VT Sedan

    Join Date
    Feb 2010
    Location
    melbourne
    Posts
    592

    Default

    Quote Originally Posted by Tim Smtih View Post
    What if i couldn't be bothered replacing it myself? Anyone able to recommend someone that will do a fair job in Brisbane?
    I have quoted a few in sydney for a wagon around $150///$180
    Should be around the same price in your area????


Similar Threads

  1. roof lining
    By bulldog79 in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 5
    Last Post: 20-05-2010, 10:44 AM
  2. roof lining
    By bulldog79 in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 2
    Last Post: 16-05-2010, 08:03 PM
  3. [SA] FS: Complete VQ Roof Lining + Caprice Roof Bits
    By PREDATR in forum Parts And Other Items For Sale
    Replies: 0
    Last Post: 21-07-2009, 06:10 PM
  4. VS roof lining
    By mcvk in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 1
    Last Post: 06-01-2008, 07:56 PM
  5. vh roof lining
    By scolari in forum VB - VK Holden Commodore (1978 - 1985)
    Replies: 5
    Last Post: 28-06-2006, 05:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72