hi, i have a vt ss and im trying to wire up a auto window module to the central locking, can anyone please tell me what colour wires in the door are for this? and which is - and + ?? thanx
Does this help.. I'm sure if you used the search button you would find more info.
Cheers,
Dave
i've just done this
the best place to access the window loom and fit the module(under the rear air tubes) is under the console they all work the same cut power to the switch and feed the windows
blue/yellow RHR up
blue/red LHR up
blue LHF up
blue/white RHF UP
the triggers are found in the drivers foot well and depending on how you want to trigger it you'll need to install a relay
Thanx oska, i have done the wires for the windows but what colour wires are for the trigger? i have found 5 wires that go the door lock thingy but i dont know which ones to use thanx
the brown/orange will give you a positive trigger
it is best to wire a relay from that to give you a neg trigger
so use it to power the relay pin 86, negative to pin 85 and 30 the connect the neg trigger from the window up to pin 87 of the relay
hope it makes sense
thanks guys im gunna give it a go on wednesday hopefully it will work cheers
I just posted about this as all above info seemed wrong and didn't help me do my brother's VT.
LIGHT GREEN/YELLOW STRIPE wire was negative trigger UNLOCK
BROWN / WHITE STRIPE wire was negative trigger for LOCK
These are accessible in driver's side kick panel and go up into the BCM. We pulled the plug out of the side of the BCM , soldered to these two wires, then plugged in back in. Works pefect.
This was on a VT executive 6 cyl commodore.
So again, it is NEGATIVE TRIGGER. light green wire with yellow stripe is UNLOCK, and the Brown wire with the white strip is the LOCK wire for central locking.
DeanO
Sorry, my post only valid for central locking, not for window module... Having said that... buggered if I could find the above info last week hence why I just posted it myself.
DeanO