Radious rod Bushes
Hi again guys/gals
My front radious rod bushes are shot and i need to replace them ASAP on a vt 2000 gen3 The Bushes that goto the Xmember to control arm
Just wondering if someone can point me in the right direction for nolathane as around this area they are gonna cost me between $160-$240
Real cars don't power the front wheels, they lift them
VT V6 wanting 300RWHP
Get them directly from nolathane themselves, cut out the middle man and you always get things cheaper!!
VT V6 fitted with DMS gold 40mm coilovers, Whiteline adjustable swaybars & strut brace, 330mm AP racing brakes, Rebuilt 3.45:1 LSD and a Powerdyne supercharger
Check it out: http://forums.justcommodores.com.au/...-v6-racer.html
If you are not so keen on Nolathane, Nepean spares in Glossop, St Marys, Sydney does a rubber set for less than $120. If you can get Nolathane for $160, that's a good price also. I have been told that the Nolathane do not last any longer than rubber, just harder compound. I was just reading the info about this in the Holden service manual. After seeing Z-bar, radius rod, caster rod/bar and other names for this item, is it a bit strange that GMH calls it a "tension rod"?
Last edited by graham7773; 16-12-2010 at 12:09 PM.
I have just recently changed the bushes in my VX SS the LS1 workshop I go to used the SuperPro Polyurethane bushes. Might pay to compare prices of the SuperPro brand against the Nolathane brand. Made a big diference to the handling of my VX SS it is a lot more positive on the road.
just did mine in a v6 vt. superpro brand from burson for 180, !
just get part numbers and ring around
Evil is always around you
FTW.... Super Pro all round.
/End Thread
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote