Vx coil relocation ????

[87LAG]

hi all just wanting to get a coil relocation setup like the one in the attached photo to move them behind the throttle body. i just put a raptor on with 12mm plenum and manifold spacers and the coils rub on the bonnet mat inside..... if any one has done this succesfully and nos where to get such a bracket and lets me no where it attaches this would be grand....

cheers

[vxcustom]

I am looking at doing this myself as the coil pack will get in the way of the future turbo and besides it looks neater, as far as brackets go they are not hard to make to suit the application however (as it is a bit further down my list yet of things to do) I have not looked into the relocation of the wiring as that I beleive would be the headache. HT Lead lengths should remain approx the same depending on where you locate the pack.

[MR_VX]

you should have got a relocation bracket with your raptor supercharger kit. I did

[87LAG]

def got a bracket to mount on the front but just think its neater up near the firewall . . .

[Mick1988]

Modify your bracket then Got a welder?

[MACE]

You'll need to run longer bolts and spacers, equal in size to the thickness of the spacers

Cheers,
Steve

[NVMYVT]

not sure how to go about it,,,,but damm thats a sexy looking engine bay for a v6 powered car

[MR_VX]

the bracket supplied should would on the back of the plenum as well as the front just turn it around

[87LAG]

Possibly will . . . Ill check it out

[87LAG]

Bloody egr in the way

[Claudy]

Pffff who needs EGR valve anyway hehe

[MR_VX]

Pffff who needs EGR valve anyway hehe

lol yep block that sh*t right off

[keza87]

I have mine up against the firewall on the drivers' side of the car. Doing the wiring was a bit of a headache but was well worth it.
I need to make a better bracket up as the coils are actually rubbing on the fire wall under hard acceleration.



Not the best images but you can see how its been done.