For the last 2-3 weeks i can hear a vibration noise coming from the front, the noise is like when you drive over the white bumpy line on the side of the high way. Just wondering if it would be a worn bush and if so which one should i be looking at???
I already no i have to replace the radius bushes, ive got a set of whiteline just have to put them in.
any suggetions on which ones i should replace aswell?????
Check out my ride here >>>>My VX Raptor
say NO to chev badges
Wanted To Buy=>> Mace 12mm or 25mm Manifold spacers - VX SS Headlights - VY handbrake complete set up
For Sale=>> vt/vx Berlina/Calais chrome window surround PM me for more details
Get the tyre balance checked first.
As suggested get the wheels re-balanced but also have a look at the Top Strut mounts, the original Holden ones tend do shite themselves quite often.
Might also be good good idea to take it to a suspension shop for a quick look over by a professional...![]()
Check out my ride here >>>>My VX Raptor
say NO to chev badges
Wanted To Buy=>> Mace 12mm or 25mm Manifold spacers - VX SS Headlights - VY handbrake complete set up
For Sale=>> vt/vx Berlina/Calais chrome window surround PM me for more details
Check your link pin bushes.
If it's vibrating the whole time I'd seriously doubt it's bushes. My money is still on tyre balance.
Check out my ride here >>>>My VX Raptor
say NO to chev badges
Wanted To Buy=>> Mace 12mm or 25mm Manifold spacers - VX SS Headlights - VY handbrake complete set up
For Sale=>> vt/vx Berlina/Calais chrome window surround PM me for more details
That's strange, I took my car to pedders for the $14 check and they said the front end was fine with the exception of the sway bar bushes. I took it in because the steering wheel on my car vibrates above 100km/h. I have had the wheels balanced but no improvement (tyres have only done 25,000kms). Looking at replacing the engine mounts as they are stuffed. The sump sits about 10mm below the cross-member.
Have you had you engine mounts checked?
Buy Nolethane bushings and fit them yourself. DIY is your friend.
VX2 Executive Sedan - 3.8L Auto (for now)VT SS Sedan - Supercharged V6 Auto (Genuine L67 SS)VN SS Sedan - 5.0L 5 Speed Manual (Currently Balga spec waiting for panel and paint)
Swaybar link bushes are common and will make a rattle noise as the rubber donuts split and fall out resulting in the washers vibrating against metal.
Silver Certified.
Check out my ride here >>>>My VX Raptor
say NO to chev badges
Wanted To Buy=>> Mace 12mm or 25mm Manifold spacers - VX SS Headlights - VY handbrake complete set up
For Sale=>> vt/vx Berlina/Calais chrome window surround PM me for more details
IMO if the bushes havn't been done before then do the lot if you plan on keeping your car.
'Ah well, I suppose it had to come to this.'
Try the link below.
If you replacing the radius rod bushes you may aswell compliment them with replacing the other bushes aswell . you wont regret it. I didnt
I didnt find any difference between the VS and VT front end. Ive worked on both.
The link has pics in there somewhere aswell
or better yet PM me if you need any more info.
I did 2 cars in the driveway, saved bucket loads of cash on labor
VS Suspension Advice
http://tinyurl.com/MetalisAwesome
Only two things are infinite, the universe and human stupidity, and I'm not sure about the former.
Albert Einstein