99 executive manual to electric windows?

[josh86_vs96clubby]

hey guys, i have a 99 vt auto executive, just wanting to know if the car has all the wirering to convert from manual windows to electric. and if so is all i need is the centre and door buttons and regulator, cheers

[1dvsbstd]

hey guys, i have a 99 vt auto executive, just wanting to know if the car has all the wirering to convert from manual windows to electric. and if so is all i need is the centre and door buttons and regulator, cheers

have u looked for the wiring??? lol..
it probably does not.. but its easy enough to go have a look..

cheers

[accentstencil]

Heaps of info on here about it already, a search should find something.

[wrx884]

should do, my 98 exec does. If it wasnt an exec then mayb best checking.

[lonleylad]

i have a 98 acclaim ,which i am fitting elect windows to ..all wiring is there..all i need was a circuit breaker in the fuse block under dash..the quickest way to check is ,,take off the cover around the gear change and see if there is a large plug in wire connecter (about 10 wires i think)..this is the main switch plug..

[Mick1988]

You will need to change your door looms but everything else should be there. If your car is a 99 VT Series 1 you will need to use VT I door looms as they changed from the Series II onwards. You can always cut and solder though.

[josh86_vs96clubby]

thanks guys!!

[VTLS1]

everyone forgot to mention the BCM. If you only have a low BCM you will need to do a bit of extra wiring under the dash. If its a mid or high BCM,then all will be sweet. Which BCM you have will be written on a sticker on the BCM. But yes,theres also heaps of info on doing this all through this site if you go hunting