VXS11 - VZ wiper stalk into VTS2

[sxc_sound]

So i have recently converted my stalks to VZ items with the flippy adjustment for cruise control and adjustable int wipers etc. Easy job, all works well. I am just left with 1 issue

I have a Level 2 BCM and it does not have the plug for the 2 pin plug on the wiper stalk (which is meant to goto the BCM for the speed adjustment for the intermittent wipers)

Now that will only work with a Level 3 (HIGH BCM) so just wondering if anyone knows how it adjust the speeds. can i just link the wires with a resistor or what lol. Looking at how the INT - 1 - 2 works, it flutters from 8v up to 12, is it just adjusting speed via voltage? coz i could easily hook up the intermittent to do that..

[ashbox]

i've wanted to do this but cbf cutting wires to do it....even got the indicator switch sitting in my room

[sxc_sound]

its a stupidly easy mod. Everyone should do it! cut off the factory plug, EXACT colour matching wires to the vx plug and away you go. Just dont get a calais/statesman wiper stalk like i did with the adjustable int. Unless u have a calais lol